English
Language : 

MDM Datasheet, PDF (8/11 Pages) ITT Industries – Micro-D Metal Shell - .050 Contact Spacing
Micro-D Metal Shell - .050" Contact Spacing
MDM
Mounting Hardware Views (for size 100)
This hardware supplied unassembled.
90˚Angle Mounting
Bracket
#4-40 UNC-2A THD
#4 LOCK WASHER
PANEL -
MAY BE USED WITH
.093 (2.36) MAX
THICK PANEL
MATING SIDE
.500 (12.70)
MAX.
.185 (4.70)
MAX.
#4-40 UNC-2B NOTHING OR FEMALE THD
Jackpost - (P)
Note: Size 100 requires .120 dia (B) mounting hole
when using Commercial (P) jackpost kits.
.123 ± .005
(3.12 ± 0.13) DIA.
#4-40 UNC-2B
THD
A
.395 (10.03)
MAX.
+.010
180 -.005
(4.57 +-.00.2153)
.064 ± .010
B
.235 ± .005
(1.62 ± 0.25) TYP.
(5.97 ± 0.13)
90° Angle Mounting
Bracket
Description
Jackpost kit
Mounting Bracket 90˚ MDM
Part Number
320-9505-015
015-9528-000
A
± .005 (0.13)
N/A
.191 (4.85)
B
Max.
.370 (9.40)
This hardware is factory installed.
.014 ± .004
(0.36 ± 0.10) ALLOWABLE
DIAMETRAL FLOAT
.020 (0.51) MAX. ALLOWABLE
AXIAL FLOAT
.174 ± .005
(4.4 ± .10)
MATING
FACE
.185 (4.70)
MAX
.093
(2.36)
REF.
.116 ± .002
(2.29 ± .051)
DIA
Float Mount - (F) Std.
.031 ± .003
(0.79 ± 0.08)
CONNECTOR
SHOWN FOR
REF. ONLY
.735 (18.67)
MAX.
MATING
FACE
#4-40
PART HAS A .040 (1.02)
UNC-2A MAX AXIAL FLOAT
THD
Jackscrew - (K) Standard
*NOTE: Torque values are as follows:
Low Profile Jackscrew (L)-4.0 in-lbs
Standard Profile Jackscrew (K)-4.0 in-lbs
HEX. SOCKET HEAD.
.078 (1.98) ACROSS FLATS
.050 (1.27) MIN. DEPTH
.155 (3.94) MAX.
.040 (1.02) MAX.
AXIAL FLOAT
MATING SIDE
#4-40 UNC-2A THD
Jackscrew - (L) (Low Profile)
Jackpost Bushing (for Rear Panel Mounting)
ENGAGING FACE
3/16" HEX.
LOCKING POST
#4-40 UNC-2B
Panel
Thickness
3/32 (2.4)
1/16 (1.6)
1/32 (0.8)
3/64 (1.2)
A
+.005 (0.13)
-.000 (0.00)
.087 (2.21)
.058 (1.42)
.025 (0.64)
.042 (1.07)
Jackpost Kit
Number*
320-9505-013
320-9505-012
320-9505-010
320-9505-011
*2 jackposts, 2 nuts, 2 washers
RECEPTACLE SHOWN
FOR REF. ONLY
#4-40 THREAD
RETAINING NUT
.185 (4.70)
.170 (4.32)
A
.500 (12.70)
MAX.
Torque value for size 100
Note: Size 100 requires B mounting hole shell
size when using rear panel mount jackposts
Dimensions for Rear Panel Mounting
1.800 ± .005
(45.72 ± 0.13)
.125
+.005
-.000
R
(3.18 +0.13 )
-0.00
1.516
+.004
-.000
(38.51 +1.10 )
-0.00
.401
+.004
-.000
(10.18 +1.10 )
-0.00
.161 (4.09)
DIA.
.159 (4.04)
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
14