MDM Datasheet, PDF (11/11 Pages) ITT Industries – Micro-D Metal Shell - .050 Contact Spacing

Micro-D Metal Shell - .050" Contact Spacing
MIL-DTL-83513
How to Order - MIL-DTL-83513 Part Number Nomenclature – Slash Sheets 10-27
M83513/ 10 - A * * C *
SERIES
Connector, Electrical, Rectangular
Microminiature, Polarized Shell
PC Board Mounting
MIL-C-83513 SLASH SHEET
10 – Connector, Plug, Condensed Board Right Angle (CBR), Sizes 9 – 37
11 – Connector, Plug, CBR, Size 51
12 – Connector, Plug, CBR, Size 100
13 – Connector, Receptacle, CBR, Sizes 9 – 37
14 – Connector, Receptacle, CBR Size 51
15 – Connector, Receptacle, CBR, Size 100
16 – Connector, Plug, Board Right Angle (BR), Sizes 9 – 37
17 – Connector, Plug, BR, Size 51
18 – Connector, Plug, BR, Size 100
19 – Connector, Receptacle, BR, Sizes 9 – 37
20 – Connector, Receptacle, BR Size 51
21 – Connector, Receptacle, BR Size 100
22 – Connector, Plug, Board Straight (BS), Sizes 9 – 37
23 – Connector, Plug, BS, Size 51
24 – Connector, Plug, BS, Size 100
25 – Connector, Receptacle, BS, Sizes 9 – 37
26 – Connector, Receptacle, BS, Size 51
27 – Connector, Receptacle, BS Size 100
INSERT ARRANGEMENT
METAL SHELL
A - 9 Contact
B - 15 Contact
C - 21 Contact
D - 25 Contact
E - 31 Contact
F - 37 Contact
G - 51 Contact
H - 100 Contact
WIRE TYPE
NOTES:
1 ^- For every Mil Spec Part Number, ITT has one
corresponding part number
2 ^{- Tolerance on wire lengths ±.015}
No Number - For Solderpot
01 - .109" long, #24 AWG solid copper wire per QQ-W-343, Type “S”, solder dipped
02 - .140" long, #24 AWG solid copper wire per QQ-W-343, Type “S”, solder dipped 2
03 - .172" long, #24 AWG solid copper wire per QQ-W-343, Type “S”, solder dipped
3 - For space application, connector shell finish must be "N". _{SHELL FINISH}
4 - Any deviations to these P/N's will result in assignment
of a special P/N, consult customer service.
No letter - for plastic type connector
C - Cadmium / Yellow chromate over nickel
N - Electroless Nickel _{3 3}
HARDWARE
N - No jackpost
P - Jackpost (permanently attached)
T - Threaded insert
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
17