D20419 Datasheet, PDF (89/301 Pages) ITT Industries – D Subminiature Connectors

D Subminiature
Insertion/Extraction Instructions for Coaxial, High Power and High Voltage Contacts
Insertion Tool
No insertion tool is required. The contact is easily
snapped in from the rear of the connector
manually.
Insertion Instructions
Combo D^
Extraction Tool
CET-C6B-2
Operating Instructions
The CET-C6B-2 tool extracts all coaxial, high
power and high voltage contacts (plug and
receptacle).
Description
CET-C6B-2
Part Number
070064-0002
To extract the coaxial contact, hold the tool by the
body and insert the tip into the front of the contact
cavity until it bottoms and closes the coaxial
retaining ring. Holding the body in this position
securely enough to keep coaxial retaining ring
closed, push the plunger; contact will be pushed
out of the rear of the assembly.
Dimensions are shown in mm (inch)
88
Dimensions subject to change