D20419 Datasheet, PDF (216/301 Pages) ITT Industries – D Subminiature Connectors

D Subminiature Accessories
Gender Changer
Gender Changer
Male/Male
2X Ø 3,43
(.135)
Pin
A
14,50 ± 0,64
(.571 ± .025)
B
C
5,84 ± 0,15
8,36 ± 0,13 ^{(.230 ± .006)}
(.329 ± .005)
5,84 ± 0,15
(.230 ± .006)
Gender Changers modify the mating interface to
allow connectors of the same genders to mate.
Product Features
ɀ Low cost way to correct design errors
ɀ Optional hardware allows design flexibility
12,55 ± 0,38
(.494 ± .015)
PIN 1
FRONT
SIDE
PIN 1
REAR
SIDE
2X 10°
CONTACT
PIN
FRONT SHELL
RIVET
FRONT SHELL
INSULATOR–PC BOARD
Note: Grounding dimples available on male/male only.
Shell
Part Number
Size Layout Without Hardware
DE
9
DE111805-1
DA
15
DA111806-1
DB
25
DB111807-1
DC
37
DC111808-1
Note: DD-50 not available in male/male.
Part Number
With Hardware
DE111805-5
DA111806-5
DB111807-5
DC111808-5
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
69,32 (2.729)
B
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
C
±0,13 (.005)
16,92 (.666)
25,25 (.994)
38,96 (1.534)
55,42 (2.182)
Female/Female
A
Socket
12,55 ± 0,38
(.494 ± .015)
B
6,17 ± 0,13
(.243 ± .005)
C
FRONT
SHELL
7,90 ± 0,13
(.311 ± .005)
INSULATOR
SOCKET
CONTACT
Gender Changers modify the mating interface to
allow connectors of the same genders to mate.
Product Features
ɀ Low cost way to correct design errors
ɀ Optional hardware allows design flexibility
2X 10°
2X Ø 3,05
(.120)
Shell
Part Number
Part Number
Size Layout Without Hardware With Hardware
DE
9
DE111813
DE111813-3
DA
15
DA111810
DA111810-3
DB
25
DB111811
DB111811-2
Note: DC-37 and DD-50 not available for female/female.
0,76 ± 0,26
(.030 ± .010)
A
±0,38 (.015)
30,81 (1.213)
39,14 (1.541)
53,04 (2.088)
B
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
Specifications
13,11 ± 0,51
(.516 ± .020)
6,17 ± 0,13
(.243 ± .005)
INSULATOR
FRONT
SHELL
C
±0,13 (.005)
16,33 (.643)
24,66 (.971)
38,38 (1.511)
Temperature: −55° C to 105° C
Current Rating: 3 A
Dielectric Withstanding Voltage: 500 VAC at Sea Level
Materials and Finishes
Description
Shells
M/M
Insulator
F/F
Contacts
Rivets (M/M)
Locking Hardware
Material
Steel
Glass Epoxy
Black Thermoplastic, UL 94V-0
Copper Alloy
Copper Alloy
Steel
Finish
Tin/Lead
—
—
Gold Over Nickel
Tin/Lead
Clear Chromate Over
Cadmium or Zinc and Mylar
Dimensions are shown in mm (inch)
Dimensions subject to change 217