D20419 Datasheet, PDF (63/301 Pages) ITT Industries – D Subminiature Connectors

D Subminiature
Combo D^
40 A High Power 90° — Standard Footprint .489^ɍ or .454 inch^ɍɍ (Size DD)
Plug
Part Numbers with Metal Bracket and Rivnut #4-40 UNC
Shell Size
Part Number
Without Screw Locks
Layout Without Boardlocks
Part Number
Without Screw Locks
With Boardlocks
Part Number
With Screw Locks
Without Boardlocks
DD
24W7 DDMP24H7PJK87
DDMC24H7PJK87
DDMD24H7PJK87
DD
36W4 DDMP36H4PJK87
DDMC36H4PJK87
DDMD36H4PJK87
DD
43W2 DDMP43H2PJK87
DDMC43H2PJK87
DDMD43H2PJK87
DD
47W1 DDMP47H1PJK87
DDMC47H1PJK87
DDMD47H1PJK87
Note: For contacts with 30 microinches gold substitute K127 for K87. Example: DDMP24H7PJK127
Reader’s Resource
ɀ For contact cavity arrangements,
see page 222.
ɀ For P.C. hole patterns, see page 246.
ɀ For panel cutouts, see page 221.
ɀ For alternate bracket configuration (when
connectors are supplied without boardlocks),
see page 226.
Part Number
With Screw Locks
With Boardlocks
DDMG24H7PJK87
DDMG36H4PJK87
DDMG43H2PJK87
DDMG47H1PJK87
Engaging Face
A
C
B
E
3,89 (.153)
MIN
20,57 ± 0,38
(.810 ± .015)
D
BOARDLOCK
10°
Ø
3.18
(.125)
Ø 0,76
(.030)
2,92
(.115)
13,74
(.541) 10,06
(.396)
BRACKET,
METAL
RIVNUT
#4-40 UNC
6,50 ± 0,25
(.256 ± .010)
SCREW LOCK
#4-40 UNC
Note: ɋ Dimension varies with alternate bracket configuration, see Reader’s Resource page 226.
Dimensions
Shell Size
A
±0,38 (.015)
B
±0,13 (.005)
DD
66,93 (2.635)
52,81 (2.079)
ɍ Connector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
C
±0,13 (.005)
61,11 (2.406)
D
±0,13 (.005)
11,07 (.436)
E
±0,38 (.015)
15,37 (.605)
L
Screw lock, boardlock, and signal contacts
removed for clarity
2,84
(.112)
5,68
(.224)
4,33 ± 0,38
(.170 ± .015)
11,53 ± 0,25
(.454 ± .010)
F
W
Screw lock, boardlock, and high power contact
removed for clarity
F
±0,25 (.010)
10,82 (.426)
W
±0,41 (.016)
6,84 (.269)
L
±0,25 (.010)
0,99 (.039)
Dimensions are shown in mm (inch)
62
Dimensions subject to change