D20419 Datasheet, PDF (66/301 Pages) ITT Industries – D Subminiature Connectors

D Subminiature
Combo D^
40 A High Power 90° — European Footprint 10,2^ɍ or 9,4 mm^ɍɍ (Sizes DE-DC)
Receptacle
Reader’s Resource
ɀ For contact cavity arrangements,
see page 223.
ɀ For P.C. hole patterns, see pages 252-253.
ɀ For panel cutouts, see page 221.
ɀ For alternate bracket configuration (when
connectors are supplied without boardlocks),
see page 226.
Part Numbers with Metal Bracket and Rivnut #4-40 UNC
Shell Size Layout
Part Number
Without Screw Locks
Without Boardlocks
Part Number
Without Screw Locks
With Boardlocks
Part Number
With Screw Locks
Without Boardlocks
DE
5W1 DEMP5P1SVA197
DEMC5P1SVA197
DEMD5P1SVA197
DA
7W2 DAMP7P2SVA197
DAMC7P2SVA197
DAMD7P2SVA197
DA
11W1 DAMP11P1SVA197
DAMC11P1SVA197
DAMD11P1SVA197
DA
3W3 DAMP3P3SVA197
DAMC3P3SVA197
DAMD3P3SVA197
DA
3WK3ឮ DAMP3PK3SVA197TM DAMC3PK3SVA197TM DAMD3PK3SVA197TM
DB
5W5 DBMP5P5SVA197
DBMC5P5SVA197
DBMD5P5SVA197
DB
9W4 DBMP9P4SVA197
DBMC9P4SVA197
DBMD9P4SVA197
DB
13W3 DBMP13P3SVA197
DBMC13P3SVA197
DBMD13P3SVA197
DB
17W2 DBMP17P2SVA197
DBMC17P2SVA197
DBMD17P2SVA197
DB
21W1 DBMP21P1SVA197
DBMC21P1SVA197
DBMD21P1SVA197
DC
8W8 DCMP8P8SVA197
DCMC8P8SVA197
DCMD8P8SVA197
DC
13W6 DCMP13P6SVA197
DCMC13P6SVA197
DCMD13P6SVA197
DC
17W5 DCMP17P5SVA197
DCMC17P5SVA197
DCMD17P5SVA197
DC
21WA4 DCMP21PA4SVA197 DCMC21PA4SVA197 DCMD21PA4SVA197
DC
25W3 DCMP25P3SVA197
DCMC25P3SVA197
DCMD25P3SVA197
DC
27W2 DCMP27P2SVA197
DCMC27P2SVA197
DCMD27P2SVA197
For M3 threads replace MP with MS, MC with ML, MD with MO, MG with MJ.
Notes: For performance class 2 substitute K126 for A197. Example: DEMP5P1SVK126
ឮ Keyed.
Part Number
With Screw Locks
With Boardlocks
DEMG5P1SVA197
DAMG7P2SVA197
DAMG11P1SVA197
DAMG3P3SVA197
DAMG3PK3SVA197TM
DBMG5P5SVA197
DBMG9P4SVA197
DBMG13P3SVA197
DBMG17P2SVA197
DBMG21P1SVA197
DCMG8P8SVA197
DCMG13P6SVA197
DCMG17P5SVA197
DCMG21PA4SVA197
DCMG25P3SVA197
DCMG27P2SVA197
Engaging Face
A
C
B
E
D
3,30 (.130)
MIN.
11,94 ± 0,25
(.470 ± .010)
L
1,00 (.039)
BOARDLOCK
Ø 0,60
(.024)
Ø 2,90
(.114)
2,92
(.115)
BRACKET,
METAL
Screw lock, boardlock, and signal contacts
removed for clarity
2,54
(.100)
4,00 (.157)
14,55
(.573) _10,85
(.427)
RIVNUT
#4-40 UNC
9,40 ± 0,20
(.370 ± .008)
F
6,50 ± 0,25
(.256 ± .010)
SCREW LOCK
#4-40 UNC
Note: ɋ Dimension varies with alternate bracket configuration, see Reader’s Resource page 226.
Dimensions
Shell Size
A
±0,38 (.015)
B
±0,13 (.005)
DE
30,81 (1.213)
16,33 (.643)
DA
39,14 (1.541)
24,66 (.971)
DB
53,04 (2.088)
38,38 (1.511)
DC
69,32 (2.729)
54,84 (2.159)
ɍ Connector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
C
±0,13 (.005)
24,99 (.984)
33,32 (1.312)
47,04 (1.852)
63,50 (2.500)
D
±0,13 (.005)
7,90 (.311)
7,90 (.311)
7,90 (.311)
7,90 (.311)
E
±0,38 (.015)
12,55 (.494)
12,55 (.494)
12,55 (.494)
12,55 (.494)
Screw lock, boardlock, and high power contact
removed for clarity
F
±0,25 (.010)
10,90 (.429)
10,90 (.429)
10,90 (.429)
10,90 (.429)
W
±0,38 (.015)
6,94 (.273)
6,94 (.273)
6,94 (.273)
6,94 (.273)
L
±0,25 (.010)
0.76 (.030)
0,76 (.030)
0,76 (.030)
0,76 (.030)
Dimensions are shown in mm (inch)
Dimensions subject to change 65