IS61NLF102436A Datasheet, PDF (9/23 Pages) Integrated Silicon Solution, Inc – STATE BUS SRAM

IS61NLF102436A/IS61NVF102436A
IS61NLF204818A/IS61NVF204818A 
LINEAR BURST ADDRESS TABLE (MODE = Vss)  
0,0
A1', A0' = 1,1
0,1
1,0
ABSOLUTE MAXIMUM RATINGS⁽¹⁾
Symbol
Parameter
Value
Unit
Tstg
Storage Temperature
–65 to +150
°C
Pd
Power Dissipation
1.6
W
Iout
Output Current (per I/O)
100
mA
Vin, Vout
Voltage Relative to Vss for I/O Pins
–0.5 to Vddq + 0.3
V
Vin

Voltage Relative to Vss for
for Address and Control Inputs
–0.3 to 4.6
V
Notes:
1. Stress greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a
stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational
sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reli-
ability.
2. This device contains circuity to protect the inputs against damage due to high static voltages or electric fields; however, precau-
tions may be taken to avoid application of any voltage higher than maximum rated voltages to this high-impedance circuit.
3. This device contains circuitry that will ensure the output devices are in High-Z at power up.
Integrated Silicon Solution, Inc. — www.issi.com — 1-800-379-4774
9
Rev.  B
06/09/08