|
JANTXVR2N7261U Datasheet, PDF (2/12 Pages) International Rectifier – RADIATION HARDENED POWER MOSFET SURFCACE MOUNT(LCC-18) | |||
|
◁ |
IRHE7130, JANSR2N7261U
Pre-Irradiation
Electrical Characteristics @ Tj = 25°C (Unless Otherwise Specified)
Parameter
Min
BVDSS
Drain-to-Source Breakdown Voltage 100
âBVDSS/âTJ Temperature Coefficient of Breakdown â
Voltage
RDS(on)
Static Drain-to-Source On-State
â
Resistance
â
VGS(th)
Gate Threshold Voltage
2.0
gfs
Forward Transconductance
2.5
IDSS
Zero Gate Voltage Drain Current
â
â
IGSS
IGSS
Qg
Qgs
Qgd
td(on)
tr
td(off)
tf
LS + LD
Gate-to-Source Leakage Forward
â
Gate-to-Source Leakage Reverse
â
Total Gate Charge
â
Gate-to-Source Charge
â
Gate-to-Drain (âMillerâ) Charge
â
Turn-On Delay Time
â
Rise Time
â
Turn-Off Delay Time
â
Fall Time
â
Total Inductance
â
Ciss
Input Capacitance
â
Coss
Output Capacitance
â
Crss
Reverse Transfer Capacitance
â
Typ Max Units
ââ V
0.10 â V/°C
Test Conditions
VGS = 0V, ID = 1.0mA
Reference to 25°C, ID = 1.0mA
â 0.18
â 0.185
â 4.0
ââ
â 25
â 250
â 100
â -100
â 50
â 12
â 20
â 25
â 55
â 55
â 45
6.1 â
1100 â
310 â
55 â
â¦
V
S( )
µA
nA
nC
ns
VGS = 12V, ID =5.0A Ã
VGS = 12V, ID = 8.0A
VDS = VGS, ID = 1.0mA
VDS > 15V, IDS = 5.0A Ã
VDS= 80V ,VGS=0V
VDS = 80V,
VGS = 0V, TJ = 125°C
VGS = 20V
VGS = -20V
VGS =12V, ID =8.0A
VDS = 50V
VDD = 50V, ID =8.0A
VGS =12V, RG = 7.5â¦
nH Measured from the center of drain
pad to center of source pad
VGS = 0V, VDS = 25V
pF
f = 1.0MHz
Source-Drain Diode Ratings and Characteristics
Parameter
Min Typ Max Units
Test Conditions
IS Continuous Source Current (Body Diode) â â
ISM Pulse Source Current (Body Diode) Ã
ââ
8.0
32
A
VSD Diode Forward Voltage
â â 1.5 V
trr Reverse Recovery Time
â â 350 ns
QRR Reverse Recovery Charge
â â 3.0 µC
Tj = 25°C, IS = 8.0A, VGS = 0V Ã
Tj = 25°C, IF = 8.0A, di/dt ⤠100A/µs
VDD ⤠50V Ã
ton Forward Turn-On Time Intrinsic turn-on time is negligible. Turn-on speed is substantially controlled by LS + LD.
Thermal Resistance
Parameter
RthJC
RthJ-PCB
Junction-to-Case
Junction-to-PC Board
Min Typ Max Units
â â 5.0
â 19 â °C/W
Test Conditions
Soldered to a copper clad PC board
Note: Corresponding Spice and Saber models are available on the International Rectifier Website.
For footnotes refer to the last page
2
www.irf.com
|
▷ |