English
Language : 

ISL6334AR5368 Datasheet, PDF (8/31 Pages) Intersil Corporation – VR11.1, 4-Phase PWM Controller with Light Load Efficiency Enhancement and Load Current Monitoring Features
ISL6334AR5368
Absolute Maximum Ratings
Supply Voltage, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .+6V
All Pins . . . . . . . . . . . . . . . . . . . . . . . . . . . GND -0.3V to VCC + 0.3V
Operating Conditions
Supply Voltage, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . +5V ±5%
Ambient Temperature
ISL6334ACRZ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to +70°C
ISL6334AIRZ . . . . . . . . . . . . . . . . . . . . . . . . . . . . .-40°C to +85°C
Thermal Information
Thermal Resistance (Notes 4, 5)
θJA (°C/W) θJC (°C/W)
40 Ld 6x6 QFN Package . . . . . . . . . . .
32
2
Maximum Junction Temperature . . . . . . . . . . . . . . . . . . . . . . +150°C
Maximum Storage Temperature Range . . . . . . . . . .-65°C to +150°C
Pb-Free Reflow Profile. . . . . . . . . . . . . . . . . . . . . . . . .see link below
http://www.intersil.com/pbfree/Pb-FreeReflow.asp
CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product reliability and
result in failures not covered by warranty.
NOTES:
4. θJA is measured in free air with the component mounted on a high effective thermal conductivity test board with “direct attach” features. See
Tech Brief TB379
5. For θJC, the “case temp” location is the center of the exposed metal pad on the package underside.
Electrical Specifications Operating Conditions: VCC = 5V Unless Otherwise Specified. Boldface limits apply over the operating
temperature ranges, -40°C to +85°C or 0°C to +70°C.
PARAMETER
TEST CONDITIONS
MIN
MAX
(Note 6) TYP (Note 6) UNITS
VCC SUPPLY CURRENT
Nominal Supply
VCC = 5VDC; EN_PWR = 5VDC; RT = 100kΩ,
ISEN1 = ISEN2 = ISEN3 = ISEN4 = 80µA
-
16
20
mA
Shutdown Supply
POWER-ON RESET AND ENABLE
VCC = 5VDC; EN_PWR = 0VDC; RT = 100kΩ
-
14
17
mA
VCC Rising POR Threshold
4.3
4.4
4.5
V
VCC Falling POR Threshold
3.75 3.88 4.0
V
EN_PWR Rising Threshold
0.875 0.897 0.920
V
EN_PWR Falling Threshold
0.735 0.752 0.770
V
EN_VTT Rising Threshold
0.875 0.897 0.920
V
EN_VTT Falling Threshold
0.735 0.752 0.770
V
REFERENCE VOLTAGE AND DAC
System Accuracy of ISL6334ACRZ
(VID = 1V to 1.6V, TJ = 0°C to +70°C)
System Accuracy of ISL6334ACRZ
(VID = 0.5V to 1V, TJ = 0°C to +70°C)
System Accuracy of ISL6334AIRZ
(VID = 1V to 1.6V, TJ = -40°C to +85°C)
System Accuracy of ISL6334AIRZ
(VID = 0.8V to 1V, TJ = -40°C to +85°C)
System Accuracy of ISL6334AIRZ
(VID = 0.5V to 0.8V, TJ = -40°C to +85°C)
VID Pull-up
VID Input Low Level
(Note 7, Closed-Loop)
(Note 7, Closed-Loop)
(Note 7, Closed-Loop)
(Note 7, Closed-Loop)
(Note 7, Closed-Loop)
After tD3
-0.5
-
-5
-
-0.6
-
-6
-
-7
-
30
40
-
-
0.5 %VID
5
mV
0.6 %VID
6
mV
7
mV
50
µA
0.4
V
VID Input High Level
0.8
-
-
V
Max DAC Source Current
3.5
-
-
mA
Max DAC Sink Current
100
-
-
µA
Max REF Source/Sink Current
(Note 8)
50
-
-
µA
8
FN6839.2
September 7, 2010