ISL6334AR5368 Datasheet, PDF (30/31 Pages) Intersil Corporation – VR11.1, 4-Phase PWM Controller with Light Load Efficiency Enhancement and Load Current Monitoring Features

ISL6334AR5368
Next, place the input and output capacitors. Position one high-
frequency ceramic input capacitor next to each upper
MOSFET drain. Place the bulk input capacitors as close to the
upper MOSFET drains as dictated by the component size and
dimensions. Long distances between input capacitors and
MOSFET drains result in too much trace inductance and a
reduction in capacitor performance. Locate the output
capacitors between the inductors and the load, while keeping
them in close proximity to the microprocessor socket.
Voltage-Regulator (VR) Design Materials
The tolerance band calculation (TOB) worksheets for VR
output regulation and IMON have been developed using the
Root-Sum-Squared (RSS) method with 3 sigma distribution
point of the related components and parameters. Note that
the “Electrical Specifications” table beginning on page 8
specifies no less than 6 sigma distribution point, not suitable
for RSS TOB calculation. Intersil also developed a set of
worksheets to support VR design and layout. Contact
Intersil’s local office or field support for the latest available
information.
All Intersil U.S. products are manufactured, assembled and tested utilizing ISO9000 quality systems.
Intersil Corporation’s quality certifications can be viewed at www.intersil.com/design/quality
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without
notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and
reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result
from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see www.intersil.com
30
FN6839.2
September 7, 2010