ISL6336 Datasheet, PDF (7/31 Pages) Intersil Corporation – 6-Phase PWM Controller with Light Load Efficiency Enhancement and Current Monitoring

ISL6336, ISL6336A
Absolute Maximum Ratings
Supply Voltage, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .+6V
All Pins . . . . . . . . . . . . . . . . . . . . . . . . . . . GND -0.3V to V_CC + 0.3V
Operating Conditions
Supply Voltage, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +5V ±5%
Ambient Temperature
ISL6336ACRZ, ISL6336CRZ . . . . . . . . . . . . . . . . . . 0°C to +70°C
ISL6336AIRZ, ISL6336IRZ. . . . . . . . . . . . . . . . . . .-40°C to +85°C
Thermal Information
Thermal Resistance (Typical, Notes 1, 2) θ_JA (°C/W) θ_JC (°C/W)
48 Ld QFN Package. . . . . . . . . . . . . . .
29
2
Maximum Junction Temperature . . . . . . . . . . . . . . . . . . . . . . +150°C
Maximum Storage Temperature Range . . . . . . . . . .-65°C to +150°C
Pb-free Reflow Profile . . . . . . . . . . . . . . . . . . . . . . . . .see link below
http://www.intersil.com/pbfree/Pb-FreeReflow.asp
CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product reliability and
result in failures not covered by warranty.
NOTES:
1. θ_JA is measured in free air with the component mounted on a high effective thermal conductivity test board with “direct attach” features. See
Tech Brief TB379.
2. For θ_JC, the “case temp” location is the center of the exposed metal pad on the package underside.
Electrical Specifications
Operating Conditions: VCC = 5V, Unless Otherwise Specified. Parameters with MIN and/or MAX limits are 100%
tested at +25°C, unless otherwise specified. Temperature limits established by characterization and are not
production tested.
PARAMETER
TEST CONDITIONS
MIN TYP MAX UNITS
VCC SUPPLY CURRENT
Nominal Supply
VCC = 5VDC; EN_PWR = 5VDC; R_T = 100kΩ,
-
16
20
mA
ISEN1 = ISEN2 = ISEN3 = ISEN4 = ISEN5 = ISEN6 = 80µA
Shutdown Supply
POWER-ON RESET AND ENABLE
VCC = 5VDC; EN_PWR = 0VDC; R_T = 100kΩ
-
14
17
mA
POR Threshold
VCC Rising
4.3 4.4 4.5
V
VCC Falling
3.75 3.88 4.0
V
EN_PWR Threshold
Rising
0.875 0.897 0.920
V
Falling
0.735 0.752 0.770
V
EN_VTT Threshold
Rising
0.875 0.897 0.920
V
Falling
0.735 0.752 0.770
V
REFERENCE VOLTAGE AND DAC
System Accuracy of ISL6336ACRZ, ISL6336CRZ
(VID = 1V to 1.6V), T_J = 0°C to +70°C
System Accuracy of ISL6336ACRZ, ISL6336CRZ
(VID = 0.5V to 1V), T_J = 0°C to +70°C
System Accuracy of ISL6336AIRZ, ISL6336IRZ
(VID = 1V to1.6V), T_J = -40°C to +85°C
System Accuracy of ISL6336AIRZ, ISL6336IRZ
(VID = 0.8V to 1V), T_J = -40°C to +85°C
System Accuracy of ISL6336AIRZ, ISL6336IRZ
(VID = 0.5V to 0.8V), T_J = -40°C to +85°C
VID Pull-up
VID Input Low Level
(Note 3)
(Note 3)
(Note 3)
(Note 3)
(Note 3)
After t_D3 (see “Soft-Start” on page 19)
-0.5
-
-5
-
-0.6
-
-0.7
-
-1
-
30
40
-
-
0.5 %VID
5
mV
0.6 %VID
0.7 %VID
1
%VID
50
µA
0.4
V
VID Input High Level
0.8
-
-
V
Maximum DAC Source Current
3.5
-
-
mA
Maximum DAC Sink Current
100
-
-
µA
Maximum REF Source/Sink Current
(Note 4)
50
-
-
µA
7
FN6504.1
May 28, 2009