DG201 Datasheet, PDF (7/7 Pages) Intersil Corporation – CMOS Quad SPST Analog Switch

Dual-In-Line Plastic Packages (PDIP)
DG201
INDEX
AREA
N
12 3
E1
N/2
-B-
-A-
D
BASE
PLANE
SEATING
PLANE
E
-C- ^{A2 A}
L
CL
D1
D1
A1
e_A
B1
e
B
e_C
C
0.010 (0.25) M C A B S
e_B
NOTES:
1. Controlling Dimensions: INCH. In case of conflict between English and
Metric dimensions, the inch dimensions control.
2. Dimensioning and tolerancing per ANSI Y14.5M-1982.
3. Symbols are defined in the “MO Series Symbol List” in Section 2.2 of
Publication No. 95.
4. Dimensions A, A1 and L are measured with the package seated in JE-
DEC seating plane gauge GS-3.
5. D, D1, and E1 dimensions do not include mold flash or protrusions.
Mold flash or protrusions shall not exceed 0.010 inch (0.25mm).
6. E and e_A are measured with the leads constrained to be perpendic-
ular to datum -C- .
7. e_B and e_C are measured at the lead tips with the leads unconstrained.
e_C must be zero or greater.
8. B1 maximum dimensions do not include dambar protrusions. Dambar
protrusions shall not exceed 0.010 inch (0.25mm).
9. N is the maximum number of terminal positions.
10. Corner leads (1, N, N/2 and N/2 + 1) for E8.3, E16.3, E18.3, E28.3,
E42.6 will have a B1 dimension of 0.030 - 0.045 inch (0.76 - 1.14mm).
E16.3 (JEDEC MS-001-BB ISSUE D)
16 LEAD DUAL-IN-LINE PLASTIC PACKAGE
INCHES
MILLIMETERS
SYMBOL MIN
MAX
MIN
MAX NOTES
A
-
0.210
-
5.33
4
A1
0.015
-
0.39
-
4
A2
0.115 0.195 2.93
4.95
-
B
0.014 0.022 0.356 0.558
-
B1
0.045 0.070 1.15
1.77
8, 10
C
0.008 0.014 0.204 0.355
-
D
0.735 0.775 18.66 19.68
5
D1
0.005
-
0.13
-
5
E
0.300 0.325 7.62
8.25
6
E1
0.240 0.280 6.10
7.11
5
e
0.100 BSC
2.54 BSC
-
e_A
0.300 BSC
7.62 BSC
6
e_B
-
0.430
-
10.92
7
L
0.115 0.150 2.93
3.81
4
N
16
16
9
Rev. 0 12/93
All Intersil semiconductor products are manufactured, assembled and tested under ISO9000 quality systems certification.
Intersil semiconductor products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design and/or specifications at any time with-
out notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and
reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result
from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see web site www.intersil.com
Sales Office Headquarters
NORTH AMERICA
Intersil Corporation
P. O. Box 883, Mail Stop 53-204
Melbourne, FL 32902
TEL: [phone]
FAX: [phone]
EUROPE
Intersil SA
Mercure Center
100, Rue de la Fusee
1130 Brussels, Belgium
TEL: [phone]
FAX: [phone]
ASIA
Intersil (Taiwan) Ltd.
7F-6, No. 101 Fu Hsing North Road
Taipei, Taiwan
Republic of China
TEL: [phone]
FAX: [phone]
7