HCS139MS Datasheet, PDF (6/9 Pages) Intersil Corporation – Radiation Hardened Dual 2-to-4 Line Decoder/Demultiplexer

Specifications HCS139MS
TABLE 7. TOTAL DOSE IRRADIATION
CONFORMANCE
GROUPS
METHOD
TEST
PRE RAD
POST RAD
Group E Subgroup 2
5005
1, 7, 9
Table 4
NOTE:
1. Except FN test which will be performed 100% go/no-go.
READ AND RECORD
PRE RAD
POST RAD
1, 9
Table 4 (Note 1)
TABLE 8. STATIC AND DYNAMIC BURN-IN TEST CONNECTIONS
OPEN
GROUND
1/2 VCC = 3V ± 0.5V
VCC = 6V ± 0.5V
STATIC I BURN-IN TEST CONNECTIONS (Note1)
4 -7, 9 - 12
1 - 3, 8, 13 - 15
-
16
STATIC II BURN-IN CONNECTIONS (Note1)
4 - 7, 9 - 12
8
-
1 - 3, 13 - 16
DYNAMIC BURN-IN CONNECTIONS (Note2)
-
1, 8, 15
4 - 7, 9 - 12
16
NOTES:
1. Each pin except VCC and GND will have a resistor of 10KΩ ± 5% for static burn-in
2. Each pin except VCC and GND will have a resistor of 680Ω ± 5% for dynamic burn-in
OSCILLATOR
50kHz
25kHz
-
-
-
-
2, 14
3, 13
TABLE 9. IRRADIATION TEST CONNECTIONS
OPEN
GROUND
VCC = 5V ± 0.5V
4 - 7, 9 - 12
8
1 - 3, 13 - 16
NOTE: Each pin except VCC and GND will have a resistor of 47KΩ ± 5% for irradiation testing.
Group E, Subgroup 2, sample size is 4 dice/wafer 0 failures.
Spec Number 518832
158