ISL71091SEH10 Datasheet, PDF (5/16 Pages) Intersil Corporation – 10V Radiation Hardened Ultra Low Noise

ISL71091SEH10
Absolute Maximum Ratings
Maximum Voltage
VIN to GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.5V to +40V
VIN to GND at an LET = 86MeV•cm²/mg . . . . . . . . . . . . . . -0.5V to +36V
VOUT to GND (10s) . . . . . . . . . . . . . . . . . . . . . . . . . . . .-0.5V to V_OUT + 0.5V
Voltage on any Pin to Ground . . . . . . . . . . . . . . . . . . . -0.5V to +V_OUT + 0.5V
Voltage on DNC Pins. . . . . . . . . . . . . . . No connections permitted to these pins
ESD Ratings
Human Body Model (Tested per MIL-PRF-883 3015.7). . . . . . . . . . . 2kV
Machine Model (Tested per JESD22-A115-A) . . . . . . . . . . . . . . . . . . 200V
Charged Device Model (Tested per JESD22-C101D) . . . . . . . . . . . 750V
Thermal Information
Thermal Resistance (Typical)
_JA (°C/W) _JC (°C/W)
8 Ld Flatpack Package (Notes 4, 5). . . . . . 135
11
Storage Temperature Range. . . . . . . . . . . . . . . . . . . . . . . .-65°C to +150°C
Maximum Junction Temperature (T_JMAX) . . . . . . . . . . . . . . . . . . . . .+150°C
Recommended Operating Conditions
Input Voltage Range. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .+12V to +30V
Ambient Operating Temperature Range . . . . . . . . . . . . . -55°C to +125°C
CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product
reliability and result in failures not covered by warranty.
NOTES:
4. _JA is measured with the component mounted on a high effective thermal conductivity test board in free air. See Tech Brief TB379 for details.
5. For _JC, the “case temp” location is the center of the ceramic on the package underside.
Electrical Specifications for Flatpack V_IN = 15V, I_OUT = 0mA, C_L = 1µF and C_COMP = 0.001µF unless otherwise specified.
Boldface limits apply after radiation at +25°C and across the operating temperature range, -55°C to +125°C without radiation, unless otherwise
specified.
PARAMETER
DESCRIPTION
TEST CONDITIONS
MIN
MAX
(Note 6)
TYP
(Note 6)
UNIT
V_OUT
V_OA
V_OA
V_OA
Output Voltage
V_OUT Accuracy at T_A = +25°C
V_OUT = 10.0V, (Note 7)
V_OUT Accuracy at T_A = -55°C to +125°C V_OUT = 10.0V, (Note 7)
V_OUT Accuracy at T_A = +25°C, Post
Radiation
V_OUT = 10.0V, (Note 7)
10.0
V
-0.05
+0.05
%
-0.15
+0.15
%
-0.25
+0.25
%
TC V_OUT
Output Voltage Temperature
Coefficient (Note 8)
6
ppm/°C
V_IN
I_IN
V_OUT /V_IN
V_OUT /I_OUT
Input Voltage Range
Supply Current
Line Regulation
Load Regulation
V_D
I_SC+
I_SC-
t_R
PSRR
Dropout Voltage (Note 9)
Short-Circuit Current
Short-Circuit Current
Turn-On Settling Time
Ripple Rejection
V_OUT = 10.0V
V_IN = 12V to 30V, V_OUT = 10.0V
Sourcing: 0mA ≤ I_OUT ≤ 10mA
Sinking: -5mA ≤ I_OUT ≤ 0mA
I_OUT = 10mA
T_A = +25°C, V_OUT tied to GND
T_A = +25°C, V_OUT tied to V_IN
90% of final value, C_L = 1.0µF,
C_C = 1000pF
f = 120Hz
12
30
V
0.3
0.5
mA
0.3
5
ppm/V
11
15
ppm/mA
25
40
ppm/mA
1.1
1.6
V
55
mA
-61
mA
768
µs
80
dB
e_NV_P-P
e_NV_RMS
e_N
V_OUT/t
Output Voltage Noise
Broadband Voltage Noise
Noise Density
Long Term Stability
0.1Hz ≤ f ≤10Hz, V_OUT = 10.0V
10Hz ≤ f ≤1kHz, V_OUT = 10.0V
f = 1kHz, V_OUT = 10.0V
T_A = +25°C, 1000 hours
14.8
14.7
420
20
µV_P-P
µV_RMS
nV/Hz
ppm
Submit Document Feedback
5
FN8633.2
March 17, 2016