ISL1539A_14 Datasheet, PDF (5/23 Pages) Intersil Corporation – Dual Port VDSL2 Line Driver

ISL1539A
Electrical Specifications V_S = ±12V, R_L= 100Ω differential, I_ADJ = C₀ = C₁ = 0V, A_V = 10V/V, R_F = 3.2kΩ,
T_A = +25°C. Amplifier pairs tested separately unless otherwise indicated. (Continued)
PARAMETER
DESCRIPTION
CONDITIONS
MIN
TYP
MAX
UNIT
4MHz Harmonic 2nd Harmonic
Distortion
V_OUT = 10V_P-P-DIFF
(Note 6)
-72
dBc
3rd Harmonic
V_OUT = 10V_P-P-DIFF
(Note 6)
-70
dBc
THD
V_OUT = 10V_P-P-DIFF
(Note 6)
-68
dBc
8MHz Harmonic
Distortion
e_N
2nd Harmonic
V_OUT = 2V_P-P-DIFF (Note 6)
3rd Harmonic
V_OUT = 2V_P-P-DIFF (Note 6)
THD
V_OUT = 2V_P-P-DIFF (Note 6)
Non-Inverting Input Voltage f = 1MHZ
Noise at each of the 4 Inputs
-83
dBc
-78
dBc
-76
dBc
4.0
nV/√Hz
+i_N
Non-Inverting Input Current f = 1MHZ
Noise at each of the 4 Inputs
2.7
pA/√Hz
-i_N
Inverting Input Current Noise f = 1MHZ
at each of the 4 Inputs
23
pA/√Hz
e_N-CM
Common Mode Output Noise f = 1MHZ
at each Port Pair
90
nV/√Hz
POWER CONTROL FEATURES
V_IH
Logic High Voltage
C₀ and C₁ inputs
V_IL
Logic Low Voltage
C₀ and C₁ inputs
I_{IH0 ,} I_IH1
Logic High Current for C_0, C₁ C₀ = 3.3V, C₁ = 3.3V
I_IL0, I_IL1
Logic Low Current for C₀ or C₁ C₀ = 0V, C₁ = 0V
I_ADJ
Input Resistance
SUPPLY CHARACTERISTICS
2.0
V
0.8
V
-5
1
+5
µA
-17
-13
-10
µA
500
Ω
Maximum Operating Supply
Voltage
±12.6
V
Minimum Operating Supply
Voltage
±7.5
V
I_GND
I_S+ (Full Power)
GND Pin Current per Port
Positive Supply Current per
Port
All outputs at 0V (Note 7)
All outputs at 0V, C₀ = C₁ = 0V, No
Load
0.2
0.4
0.5
mA
21
27.2
31.5
mA
I_S+ (Medium)
Positive Supply Current per All outputs at 0V, C₀ = 3.3V, C₁ = 0V, 17.8
23
26.7
mA
Port
No Load
I_S+ (Low)
Positive Supply Current per All outputs at 0V, C₀ = 0V, C₁ = 3.3V, 10.4
13.5
15.6
mA
Port
No Load
I_S+ (Power-down) Positive Supply Current per All outputs at 0V, C₀ = C₁ = 3.3V, No
0.2
0.4
0.5
mA
Port
Load
OUTPUT CHARACTERISTICS
V_OUT
I_OL
Output Swing
R_L-DIFF = No Load
±10.7 ±10.9
V
Lightly Loaded Positive Swing R_L-DIFF = 100Ω
+10.3 +10.5
V
Lightly Loaded Negative Swing R_L-DIFF = 100Ω
-10.4 -10.2
V
Heavy Loaded Positive Swing R_L-DIFF = 60Ω
+9.4 +9.8
V
Heavy Loaded Negative Swing R_L-DIFF = 60Ω
-9.7
-9.3
V
Linear Output Current
R_L = 25Ω, f = 100kHz, THD = -60dBc
±360
mA
5
FN6916.0
September 23, 2009