English
Language : 

ISL70244SEH Datasheet, PDF (4/21 Pages) Intersil Corporation – Rail-to-rail input and output
◁
ISL70244SEH
Absolute Maximum Ratings
Maximum Supply Voltage Differential (V+ to V-) . . . . . . . . . . . . . . . . . . . 42V
Maximum Supply Voltage Differential (V+ to V-) (Note 5) . . . . . . . . . . . 38V
Maximum Differential Input Current . . . . . . . . . . . . . . . . . . . . . . . . . . 20mA
Maximum Differential Input Voltage . . . . . . . 42V or (V- - 0.5V) to V+ + 0.5V
Min/Max Input Voltage . . . . . . . . . . . . . . . . . . . 42V or (V- - 0.5V) to V+ + 0.5V
Max/Min Input Current for Input Voltage >V+ or <V- . . . . . . . . . . . . ±20mA
ESD Tolerance
Human Body Model (Tested per MIL-PRF-883 3015.7). . . . . . . . . . . 2kV
Machine Model (Tested per JESD22-A115-A) . . . . . . . . . . . . . . . . . . 200V
Charged Device Model (Tested per CDM-22CI0ID) . . . . . . . . . . . . . . 750V
Thermal Information
Thermal Resistance (Typical)
JA (°C/W) JC (°C/W)
10 Ld Flatpack Package (Notes 3, 4). . . . .
44
10
Storage Temperature Range. . . . . . . . . . . . . . . . . . . . . . . .-65°C to +150°C
Recommended Operating Conditions
Ambient Operating Temperature Range . . . . . . . . . . . . . .-55°C to +125°C
Maximum Operating Junction Temperature . . . . . . . . . . . . . . . . . .+150°C
Single Supply Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.7V to 39.6V
Split Rail Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . ±1.35V to ±19.8V
CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product
reliability and result in failures not covered by warranty.
NOTES:
3. JA is measured in free air with the component mounted on a high effective thermal conductivity test board with “direct attach” features. See Tech
Brief TB379 for details.
4. For JC, the “case temp” location is the center of the package underside.
5. Tested in a heavy ion environment at LET = 86.4MeV•cm2/mg at +125°C (TC) for SEB. Refer to Single Event Effects Test Report for more information.
Electrical Specifications VS = ±19.8V, VCM = VO = 0V, RL = Open, TA= +25°C, unless otherwise noted. Boldface limits apply across
the operating temperature range, -55°C to +125°C; over a total ionizing dose of 300krad(Si) with exposure of a high dose rate of 50 to 300rad(Si)/s or
over a total ionizing dose of 50krad(Si) with exposure at a low dose rate of <10mrad(Si)/s
PARAMETER
SYMBOL
TEST CONDITIONS
MIN
MAX
(Note 6)
TYP
(Note 6)
UNIT
Offset Voltage
Offset Voltage Temperature
Coefficient
VOS
TCVOS
VCM = 0V
VCM = V+ to V-
VCM = V+ - 2V to V- + 2V
-400
25
400
µV
-500
110
500
µV
-
0.5
-
µV/°C
Input Offset Channel-to-Channel
Match
Input Bias Current
Input Offset Current
VOS
IB
IOS
VCM = V+
VCM = V-
VCM = 0V
VCM = V+
VCM = V-
VCM = V+ - 0.5V
VCM = V- + 0.5V
VCM = V+ to V-
-
135
800
µV
-
128
800
µV
-500
210
500
nA
-500
200
500
nA
-650
290
650
nA
-500
200
500
nA
-650
257
650
nA
-30
0
30
nA
-50
0
50
nA
Common-Mode Input Voltage Range
Common-Mode Rejection Ratio
Power Supply Rejection Ratio
VCMIR
CMRR
PSRR
VCM = V- to V+
VCM = V- to V+
VCM = V+ - 0.5V to V- + 0.5V
VCM = V+ - 0.5V to V- + 0.5V
V- = -18V; V+ = 0.5V to 18V;
V+ = 18V; V- = -0.5V to -18V
V-
-
V+
V
-
112
-
dB
70
-
-
dB
-
111
-
dB
80
-
-
dB
-
128
-
dB
83
-
-
dB
Open-Loop Gain
AVOL
RL = 10kΩ to ground
-
125
-
dB
90
-
-
dB
Output Voltage High (VOUT to V+)
VOH
RL = No Load
RL = 10kΩ
-
26
160
mV
-
78
175
mV
Submit Document Feedback
4
FN8592.2
September 1, 2016
 ▷