English
Language : 

ISL6523 Datasheet, PDF (4/16 Pages) Intersil Corporation – VRM8.5 Dual PWM and Dual Linear Power System Controller
ISL6523
Absolute Maximum Ratings
Supply Voltage, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .+15V
PGOOD, RT/FAULT, DRIVE, PHASE, and
GATE Voltage . . . . . . . . . . . . . . . . . . . GND - 0.3V to VCC + 0.3V
Input, Output or I/O Voltage . . . . . . . . . . . . . . . . . . GND -0.3V to 7V
ESD Classification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Class 1
Recommended Operating Conditions
Supply Voltage, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . +12V ±10%
Ambient Temperature Range . . . . . . . . . . . . . . . . . . . . 0oC to 70oC
Junction Temperature Range . . . . . . . . . . . . . . . . . . . 0oC to 125oC
Thermal Information
Thermal Resistance (Typical, Note 1)
θJA (oC/W)
SOIC Package. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
70
Maximum Junction Temperature (Plastic Package) . . . . . . . .150oC
Maximum Storage Temperature Range . . . . . . . . . . -65oC to 150oC
Maximum Lead Temperature (Soldering 10s) . . . . . . . . . . . . .300oC
(SOIC - Lead Tips Only)
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the
device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
NOTE:
1. θJA is measured with the component mounted on a low effective thermal conductivity test board in free air. See Tech Brief TB379 for
details.
Electrical Specifications Recommended Operating Conditions, Unless Otherwise Noted. Refer to Figures 1, 2 and 3
PARAMETER
SYMBOL
TEST CONDITIONS
MIN TYP MAX
VCC SUPPLY CURRENT
Nominal Supply Current
POWER-ON RESET
Rising VCC Threshold
Falling VCC Threshold
Rising VAUX Threshold
ICC
UGATE1, LGATE1, UGATE2, DRIVE3, and
DRIVE4 Open
-
9
-
-
- 10.4
8.2
-
-
-
2.5
-
VAUX Threshold Hysteresis
-
0.5
-
Rising VOCSET1 Threshold
OSCILLATOR
- 1.26 -
Free Running Frequency
FOSC
Ramp Amplitude
∆VOSC
DAC AND STANDARD BUCK REGULATOR REFERENCE
DAC (VID25-VID3) Input Low Voltage
DAC (VID25-VID3) Input High Voltage
DACOUT Voltage Accuracy
185 200 215
-
1.9
-
0.8
2.0
-1.0
-
+1.0
PWM2 Regulation Voltage
-
1.2
-
PWM2 Regulation Voltage Tolerance
-
3
-
1.5V AND 1.8V LINEAR REGULATORS (VOUT3 AND VOUT4)
Regulation Tolerance
-
3
-
VSEN3 Regulation Voltage
VSEN4 Regulation Voltage
VSEN3,4 Under-Voltage Level
VSEN3 Under-Voltage Hysteresis
VREG3
VREG4
VSEN3,4UV
VSEN3,4 Rising
VSEN3 Falling
Output Drive Current
VAUX-VDRIVE3,4 > 0.6V
SYNCHRONOUS PWM CONTROLLER ERROR AMPLIFIER
-
1.5
-
-
1.8
-
-
75
-
7
20 40
-
DC Gain
Note 2
-
88
-
Gain-Bandwidth Product
GBWP Note 2
-
15
-
Slew Rate
SR
COMP1 = 10pF, Note 2
-
6
-
PWM CONTROLLERS GATE DRIVERS
UGATE1,2 Source
IUGATE VCC = 12V, VUGATE1 (or VUGATE2) = 6V
-
1
-
UNITS
mA
V
V
V
V
V
kHz
VP-P
V
V
%
V
%
%
V
V
%
%
mA
dB
MHz
V/µs
A
4