ISL51002_14 Datasheet, PDF (4/33 Pages) Intersil Corporation – 10-Bit Video Analog Front End (AFE) with Measurement and Auto-Adjust Features

ISL51002
Absolute Maximum Ratings
3.3V Supply Voltage (V_A3.3, V_D3.3, VPLL_A3.3) . . . . . . . . . . . . . 4.6V
1.8V Supply Voltage (V_A1.8, V_D1.8, VADC_D1.8). . . . . . . . . . . . . 2.5V
Voltage on any Input Pin . . . . . . . . . . . . . . . . . . . . . . . . . -0.5V to 6V
Output Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±20mA
ESD Rating
Human Body Model (Per MIL-STD-883 Method 3015.7) . . .3000V
Machine Model (Per EIAJ ED-4701 Method C-111) . . . . . . . .300V
Charged Device Model (Per EOS/ESD DS5.3, 4/14/93) . . .1000V
Thermal Information
Thermal Resistance (Typical)
θ_JA (°C/W) θ_JC (°C/W)
MQFP Package (Notes 3, 4) . . . . . . . .
30
16
Maximum Power Dissipation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.2W
Maximum Junction Temperature . . . . . . . . . . . . . . . . . . . . . . +125°C
Maximum Storage Temperature Range . . . . . . . . . .-65°C to +150°C
Pb-free reflow profile . . . . . . . . . . . . . . . . . . . . . . . . . .see link below
http://www.intersil.com/pbfree/Pb-FreeReflow.asp
Operating Conditions
Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to +70°C
Supply Voltage Range . . . . . . . . . . . . . . . . . 3.3V ±10%, 1.8V ±10%
CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product reliability and
result in failures not covered by warranty.
NOTES:
3. θ_JA is measured with the component mounted on a low effective thermal conductivity test board in free air. See Tech Brief TB379 for details.
4. For θ_JC, the “case temp” location is the center of the exposed metal pad on the package underside.
Electrical Specifications
Specifications apply for V_A3.3 = V_D3.3 = V_PLLA3.3 = 3.3V, V_A1.8 = V_D1.8 = V_PLLD1.8 = V_ADCD1.8 = 1.8V,
pixel rate = 110MHz for ISL51002-110, 150MHz for ISL51002-150, 165MHz for ISL51002-165, f_XTAL = 25MHz,
and T_A = +0°C to +70°C, unless otherwise specified. Boldface limits apply over the operating temperature
range, 0°C to +70°C.
SYMBOL
PARAMETER
TEST LEVEL or NOTES
MIN
MAX
(Note 8) TYP (Note 8) UNITS
FULL CHANNEL CHARACTERISTICS
Conversion Rate
ISL51002-110
10
110
MHz
ISL51002-150
10
150
MHz
ISL51002-165
10
165
MHz
ADC Resolution
10
Bits
Missing Codes
Guaranteed monotonic
None
DNL
(Full-Channel)
Differential Non-Linearity
ISL51002-110
(Note 5)
-0.99
±0.5
+1.2
LSB
ISL51002-150
-0.99
±0.7
+1.3
LSB
ISL51002-165
-0.99
±0.8
+1.4
LSB
INL
(Full-Channel)
Integral Non-Linearity
ISL51002-110
(Note 5)
±1.9
±3.6
LSB
ISL51002-150
±2.0
±3.8
LSB
ISL51002-165
±2.6
±4.0
LSB
Gain Adjustment Range
±6
dB
Gain Adjustment Resolution
10
Bits
Gain Matching Between Channels Percent of full scale
±2
%
Full Channel Offset Error,
ABLC™ enabled
ADC LSBs, over time and temperature
±0.5
±3.0
LSB
Offset Adjustment Range
(ABLC™ enabled or disabled)
(see ABLC™ applications information section)
±50%
ADC
Fullscale
4
FN6164.3
February 29, 2012