English
Language : 

HA457 Datasheet, PDF (4/14 Pages) Intersil Corporation – 95MHz, Low Power, AV = 2, 8 x 8 Video Crosspoint Switch
HA457
Absolute Maximum Ratings
Supply Voltage (V+ to V-). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12V
Positive Supply Voltage (V+) Referred to AGND . . . . . . . . . . . . . 6V
Negative Supply Voltage (V-) Referred to AGND . . . . . . . . . . . . -6V
DGND Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AGND ±1V
Analog Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±VSUPPLY
Digital Input Voltage . . . . . . . . . . . . . . (V+ + 0.3V) to (DGND - 0.3V)
ESD Rating
Human Body Model (Per MIL-STD-883 Method 3015.7) . . . 1.6kV
Operating Conditions
Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0oC to 70oC
Supply Voltage Range (Typical) . . . . . . . . . . . . . . . . . . . ±4.5V to ±5.5V
Thermal Information
Thermal Resistance (Typical, Note 1)
θJA (oC/W)
PLCC Package. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
50
MQFP Package . . . . . . . . . . . . . . . . . . . . . . . . . . . .
70
Maximum Junction Temperature (Die) . . . . . . . . . . . . . . . . . . .175oC
Maximum Junction Temperature (Plastic Package) . . . . . . . . .150oC
Maximum Storage Temperature Range . . . . . . . . . . -65oC to 150oC
Maximum Lead Temperature, Soldering 10s . . . . . . . . . . . . . 300oC
(Lead Tips Only)
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the
device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
NOTE:
1. θJA is measured with the component mounted on an evaluation PC board in free air.
Electrical Specifications VSUPPLY = ±5V, AGND = DGND = 0V, RL = 400Ω (Note 2), Unless Otherwise Specified.
PARAMETER
TEST CONDITIONS
(NOTE 3)
TEST TEMP
LEVEL (oC) MIN TYP
Voltage Gain
Channel-to-Channel Gain Mismatch
VIN = -0.75V to +0.75V, Worst Case
A
Switch Configuration,
A
RL = 150Ω
A
25 1.93 1.97
Full
-
-
25
-
0.04
A
Full
-
-
Supply Current
All Outputs Enabled, RL = Open,
VIN = 0V,
Total for All V+ (3) or V- (2) Pins
A
25
-
68
A
Full
-
71
Disabled Supply Current
All Outputs Disabled, RL = Open,
Total for All V+ (3) or V- (2) Pins
A
25
-
47
A
Full
-
47
Input Voltage Range
A
Full
±2
±2.5
Analog Input Current
Input Noise (RS = 75Ω)
VIN = 0V
DC to 40MHz
≥ 10kHz
A
Full
-
1.6
B
25
-
0.15
B
25
-
22
Analog Input Resistance
DC
C
25
-
4
Analog Input Capacitance (Input Connected to
One Output or All Outputs, Note 6)
PLCC Package
MQFP Package
B
25
-
3.2
B
25
-
2.5
Input Offset Voltage
VIN = 0V, Worst Case Switch
Configuration
A
25
-18
-12
A
Full -20 -15
Channel-to-Channel Input Offset Voltage
Mismatch
A
25
-
4
A
Full
-
8
Input Offset Voltage Drift
B
Full
-
20
Output Voltage Swing
VIN = ±1.33V, RL = 150Ω
A
25 ±2.45 ±2.6
A
Full
-
-
Output Resistance
Enabled, DC
B
25
-
0.25
Output Disabled
A
25
1.5
2
Output Capacitance
(Output Disabled)
PLCC Package
MQFP Package
B
25
-
3.5
B
25
-
2.9
Power Supply Rejection Ratio
Digital Input Current (Note 5)
DC, VS = ±4.5V to ±5.5V, VIN = 0V
A
VIN = 0V or 5V
A
Full 45
53
Full
-
-
MAX
2.10
-
UNITS
V/V
0.1
V/V
-
80
mA
83
65
mA
67
-
V
12
µA
- mVRMS
- nV/√Hz
-
MΩ
-
pF
-
pF
5
mV
6
11
mV
-
-
µV/oC
-
V
-
V
-
Ω
-
kΩ
-
pF
-
pF
-
dB
1
µA
4