X96011 Datasheet, PDF (3/23 Pages) Intersil Corporation – Temperature Sensor with Look Up Table Memory and DAC

X96011
ABSOLUTE MAXIMUM RATINGS
All voltages are referred to Vss.
Temperature under bias ................... -65°C to +100°C
Storage temperature ........................ -65°C to +150°C
Voltage on every pin except Vcc ................ -1.0V to +7V
Voltage on Vcc Pin .............................................0 to 5.5V
D.C. Output Current at pin SDA ...................... 0 to 5 mA
D.C. Output Current at pins Iout ....................... -3 to 3mA
Lead temperature (soldering, 10s) .................... 300°C
RECOMMENDED OPERATING CONDITIONS
Parameter
Temperature
Temperature while writing to memory
Voltage on Vcc Pin
Voltage on any other Pin
COMMENT
Stresses above those listed under “Absolute Maximum
Ratings” may cause permanent damage to the device.
This is a stress rating only; functional operation of the
device (at these or any other conditions above those
listed in the operational sections of this specification) is
not implied. Exposure to absolute maximum rating con-
ditions for extended periods may affect device reliability.
Min.
-40
0
3
-0.3
Max.
+100
+70
5.5
Vcc + 0.3
Units
°C
°C
V
V
3
FN8215.1
October 25, 2005