X96011 Datasheet, PDF (11/23 Pages) Intersil Corporation – Temperature Sensor with Look Up Table Memory and DAC

X96011
Figure 4. Control and Status Register Format
Byte
Address
MSB
7
6
5
4
3
80h
Non-Volatile
1
IDS
NV13 ADCfiltOff
0
Iout
Direction
0: Source
1: Sink
Control
1, 3
Volatility
0: Volatile
1: Non-
volatile
ADC
filtering
0: On
1: Off
81h
Volatile or
Non-Volatile
Direct Access to the LUT
Reserved Reserved
LDA5
LDA4
LDA3
2
0
LDA2
1
0
LDA1
LSB
0
0
Register
Name
Control 0
LDA0
Control 1
83h
Volatile or
Non-Volatile
Direct Access to the DAC
DDA7
DDA6
DDA5
DDA4
DDA3
DDA2
DDA1
DDA0
Control 3
85h
Non-Volatile
0
0
DDAS LDAS
0
Direct
Access
to DAC
0: Disabled
1: Enabled
Direct
Access
to LUT
0: Disabled
1: Enabled
0
IFSO1
IFSO0
Control 5
R Selection
00: Reserved
01: Low Internal
10: Middle Internal
11: High Internal (Default)
86h
Volatile
WEL Reserved Reserved Reserved Reserved Reserved Reserved Reserved
Write
Enable
Latch
0: Write
Disabled
1: Write
Enabled
ADC Output
87h
Volatile
AD7
AD6
AD5
AD4
AD3
AD2
AD1
AD0
Control 6
Status
Registers in byte addresses 82h, 84h, and 88h through 8Fh are reserved.
Registers bits shown as 0 or 1 should always use these values for proper operation.
11
FN8215.1
October 25, 2005