ISL267440_14 Datasheet, PDF (3/18 Pages) Intersil Corporation – 10-Bit and 12-Bit, 1MSPS SAR ADCs

ISL267440, ISL267450A
Ordering Information
PART NUMBER
(Note 4)
PART
MARKING
V_DD RANGE
(V)
TEMP RANGE
(°C)
PACKAGE
PKG.
DWG. #
ISL267440IUZ (Note 3)
67440
2.7 to 5.25
-40 to +85
8 Ld MSOP
M8.118
ISL267440IUZ-T (Notes 1, 3)
67440
2.7 to 5.25
-40 to +85
8 Ld MSOP
M8.118
ISL267440IUZ-T7A (Notes 1, 3)
67440
2.7 to 5.25
-40 to +85
8 Ld MSOP
M8.118
ISL267450AIUZ (Note 3)
7450A
2.7 to 5.25
-40 to +85
8 Ld MSOP
M8.118
ISL267450AIUZ -T (Notes 1, 3)
7450A
2.7 to 5.25
-40 to +85
8 Ld MSOP
M8.118
ISL267450AIUZ -T7A (Notes 1, 3)
7450A
2.7 to 5.25
-40 to +85
8 Ld MSOP
M8.118
ISL267440IHZ-T (Notes 1, 2)
7440 (Note 5)
2.7 to 5.25
-40 to +85
8 Ld SOT-23
P8.064
ISL267440IHZ-T7A (Notes 1, 2)
7440 (Note 5)
2.7 to 5.25
-40 to +85
8 Ld SOT-23
P8.064
ISL267450AIHZ-T (Notes 1, 2)
450A (Note 5)
2.7 to 5.25
-40 to +85
8 Ld SOT-23
P8.064
ISL267450AIHZ-T7A (Notes 1, 2)
450A (Note 5)
2.7 to 5.25
-40 to +85
8 Ld SOT-23
P8.064
NOTES:
1. Please refer to TB347 for details on reel specifications.
2. These Intersil Pb-free plastic packaged products employ special Pb-free material sets; molding compounds/die attach materials and NiPdAu plate
-e4 termination finish, which is RoHS compliant and compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free products are MSL
classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
3. These Intersil Pb-free plastic packaged products employ special Pb-free material sets, molding compounds/die attach materials, and 100% matte
tin plate plus anneal (e3 termination finish, which is RoHS compliant and compatible with both SnPb and Pb-free soldering operations). Intersil
Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
4. For Moisture Sensitivity Level (MSL), please see device information page for ISL267440 or ISL267450A. For more information on MSL please see
techbrief TB363.
5. The part marking is located on the bottom of the part.
3
FN7708.2
June 28, 2012