ISL54200 Datasheet, PDF (2/18 Pages) Intersil Corporation – USB 2.0 High/Full Speed Multiplexer

ISL54200
Pin Configurations
ISL54200
(10 LD TDFN)
TOP VIEW
PD
VDD ₁
IN ₂
LOGIC
CONTROL
COMD1 3
COMD2 4
GND 5
10 EN
4M
9 HSD1
8 _HSD2
7 FSD1
6 FSD2
ISL54200
(10 LD µTQFN)
TOP VIEW
VDD ₁
IN ₂
COMD1 3
COMD2 4
10
4M
LOGIC
CONTROL
5
9 ^HSD1
8 ^HSD2
7 FSD1
6 FSD2
NOTE:
1. ISL54200 Switches Shown for IN = Logic “0” and EN = Logic “1”.
Ordering Information
PART NUMBER
(Note 5)
PART
MARKING
TEMP. RANGE
(°C)
PACKAGE
(Pb-Free)
PKG.
DWG. #
ISL54200IRZ (Note 3)
200Z
-40 to +85
10 Ld 3x3 TDFN
L10.3x3A
ISL54200IRZ-T (Note 2, 3) 200Z
-40 to +85
10 Ld 3x3 TDFN Tape and Reel
L10.3x3A
ISL54200IRUZ-T (Note 2, 4) FM
-40 to +85
10 Ld 2.1mmx1.6mm μTQFN Tape and Reel L10.2.1x1.6A
ISL54200EVAL1Z
Evaluation Board
NOTES:
2. Please refer to TB347 for details on reel specifications.
3. These Intersil Pb-free plastic packaged products employ special Pb-free material sets, molding compounds/die attach
materials, and 100% matte tin plate plus anneal (e3 termination finish, which is RoHS compliant and compatible with both
SnPb and Pb-free soldering operations). Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that
meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
4. These Intersil Pb-free plastic packaged products employ special Pb-free material sets; molding compounds/die attach
materials and NiPdAu plate - e4 termination finish, which is RoHS compliant and compatible with both SnPb and Pb-free
soldering operations. Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed
the Pb-free requirements of IPC/JEDEC J STD-020.
5. For Moisture Sensitivity Level (MSL), please see device information page for ISL54200. For more information on MSL please
see techbrief TB363.
2
FN6408.2
June 17, 2010