ISL23315_15 Datasheet, PDF (18/20 Pages) Intersil Corporation – Single, Low Voltage Digitally Controlled Potentiometer(XDCP™)

ISL23315
Revision History
The revision history provided is for informational purposes only and is believed to be accurate, but not warranted. Please go to web to make
sure you have the latest Rev.
DATE
8/12/15
7/29/11
07/28/11
12/15/10
REVISION
FN7778.2
FN7778.1
FN7778.0
CHANGE
Updated Ordering Information table on page 3
Changed Products section to About Intersil.
Updated POD M10.118 from rev 0 to rev 1. Changes since rev0: Updated to new POD template. Added land
pattern
On page 7, “Wiper Response Time” changed text in each option
From: CS rising edge to wiper new position, from 10% to 90% of final value.
To: SCL rising edge of the acknowledge bit after data byte to wiper new position from 10% to 90% of the final
value.
Added “Shutdown Function” section and revised “VLOGIC Standby Current” and “VCC Shutdown Current” limits
on page 6.
On page 7, split “Wiper Response Time” up into 3 separate conditions for each option (W, U, T).
Initial Release
About Intersil
Intersil Corporation is a leading provider of innovative power management and precision analog solutions. The company's products
address some of the largest markets within the industrial and infrastructure, mobile computing and high-end consumer markets.
For the most updated datasheet, application notes, related documentation and related parts, please see the respective product
information page found at www.intersil.com.
You may report errors or suggestions for improving this datasheet by visiting www.intersil.com/ask.
Reliability reports are also available from our website at www.intersil.com/support
For additional products, see www.intersil.com/product_tree
Intersil products are manufactured, assembled and tested utilizing ISO9001 quality systems as noted
in the quality certifications found at www.intersil.com/design/quality
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time
without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be
accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third
parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see www.intersil.com
18
FN7778.2
August 12, 2015