ISL23315_11 Datasheet, PDF (18/20 Pages) Intersil Corporation – Single, Low Voltage Digitally Controlled Potentiometer

ISL23315
Revision History
The revision history provided is for informational purposes only and is believed to be accurate, but not warranted. Please go to web to make
sure you have the latest Rev.
DATE
7/29/11
07/28/11
12/15/10
REVISION
FN7778.1
FN7778.0
CHANGE
On page 7, “Wiper Response Time” changed text in each option
From: CS rising edge to wiper new position, from 10% to 90% of final value.
To: SCL rising edge of the acknowledge bit after data byte to wiper new position from 10% to 90% of the final
value.
Added “Shutdown Function” section and revised “VLOGIC Standby Current” and “VCC Shutdown Current” limits
on page 6.
On page 7, split “Wiper Response Time” up into 3 separate conditions for each option (W, U, T).
Initial Release
Products
Intersil Corporation is a leader in the design and manufacture of high-performance analog semiconductors. The Company's products address
some of the industry's fastest growing markets, such as, flat panel displays, cell phones, handheld products, and notebooks. Intersil's product
families address power management and analog signal processing functions. Go to www.intersil.com/products for a complete list of Intersil
product families.
For a complete listing of Applications, Related Documentation and Related Parts, please see the respective device information page on
intersil.com: ISL23315
To report errors or suggestions for this datasheet, please go to www.intersil.com/askourstaff
FITs are available from our website at http://rel.intersil.com/reports/search.php
For additional products, see www.intersil.com/product_tree
Intersil products are manufactured, assembled and tested utilizing ISO9000 quality systems as noted
in the quality certifications found at www.intersil.com/design/quality
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time
without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be
accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third
parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see www.intersil.com
18
FN7778.1
August 15, 2011