ISL71590SEH Datasheet, PDF (16/16 Pages) Intersil Corporation – Radiation Hardened

ISL71590SEH
Package Outline Drawing
K2.A
2 LEAD CERAMIC METAL SEAL FLATPACK PACKAGE
Rev 1, 4/12
0.030 (0.762) REF
POSITIVE LEAD INDICATOR (NO. 1)
0.019 (0.483)
A
0.015 (0.381)
0.050 (1.270) BSC
A
PIN NO. 1 ID OPTIONAL
1
2
PIN NO. 1 ID AREA
0.093 (2.362)
0.081 (2.057)
0.500 (12.70) MIN
TOP VIEW
0.240 (6.10)
0.220 (5.59)
0.0065 (0.1651)
0.0045 (0.1143)
0.0065 (0.1651)
0.0045 (0.1143)
LEAD FINISH
BASE
METAL
0.0095 (0.2413)
0.0045 (0.1143)
0.019 (0.48)
0.015 (0.38)
0.022 (0.56)
0.015 (0.38)
0.0015 (0.04)
MAX
3
SECTION A-A
0.210 (5.33)
0.190 (4.83)
0.014 (0.356) REF
SIDE VIEW
0.050 (1.270)
0.041 (1.041)
NOTES:
1. Index area: A notch or a pin one identification mark shall be located
adjacent to pin one and shall be located within the shaded area shown.
The manufacturer’s identification shall not be used as a pin one
identification mark. Alternately, a tab may be used to identify pin one.
2. If a pin one identification mark is used in addition to a tab, the limits
of the tab dimension do not apply.
3. The maximum limits of lead dimensions (section A-A) shall be
measured at the centroid of the finished lead surfaces, when solder
dip or tin plate lead finish is applied.
4. Dimensioning and tolerancing conform to ANSI Y14.5M-1982.
5. Dimensions: Inch (mm). Controlling dimension: Inch.
Submit Document Feedback ₁₆
June 3, 2016
FN8376.2