ISL29035_14 Datasheet, PDF (16/16 Pages) Intersil Corporation – Integrated Digital Light Sensor with Interrupt

ISL29035
Package Outline Drawing
L6.1.5x1.6
6 LEAD OPTICAL DUAL FLAT NO-LEAD PLASTIC PACKAGE (ODFN)
Rev 0, 5/12
1.50
6
PIN 1
0.50
1.60
0.55
PIN #1 INDEX AREA
(2X) 0.10
TOP VIEW
4 ^0.25
0.40
0.10 M C A B
0.70
BOTTOM VIEW
0.18
2.00
0.80
0.50
PACKAGE
OUTLINE
0.25
0.65
0.25
0.70
TYPICAL RECOMMENDED LAND PATTERN
0.70 ± 0.05
SIDE VIEW
SEE DETAIL "X"
0.10 C
C
BASE PLANE
SEATING PLANE
0.08 C
C 0 . 2 REF
5
0 . 00 MIN.
0 . 05 MAX.
DETAIL “X”
NOTES:
1. Dimensions are in millimeters.
Dimensions in ( ) for Reference Only.
2. Dimensioning and tolerancing conform to ASME Y14.5m-1994.
3. Unless otherwise specified, tolerance: Decimal ± 0.05
4. Dimension applies to the metallized terminal and is measured
between 0.15mm and 0.30mm from the terminal tip.
5. Tiebar shown (if present) is a non-functional feature.
6. The configuration of the pin #1 identifier is optional, but must be
located within the zone indicated. The pin #1 identifier may be
either a mold or mark feature.
Submit Document Feedback ₁₆
FN8371.1
November 12, 2014