ISL22444 Datasheet, PDF (16/19 Pages) Intersil Corporation – Quad Digitally Controlled Potentiometer XDCP

ISL22444
CS
SCK
SDI
SDO
16 CLKS
RD DCP2
16 CLKS
RD DCP1
16 CLKS
RD DCP0
16 CLKS
NOP
16 CLKS
NOP
16 CLKS
NOP
DCP2 OUT
DCP1 OUT
DCP0 OUT
FIGURE 21. DAISY CHAIN READ SEQUENCE OF N = 3 DCP
Application Example
Figure 22 shows an example of using ISL22444 for gain
setting and offset correction in a high side current
measurement application. DCP0 applies a programmable
offset voltage of ±25mV to the FB+ pin of the Instrumentation
Amplifier ISL28272 to adjust output offset to zero voltages.
DCP1 programs the gain of the ISL28272 from 90 to 110
with 5V output for 10A current through current sense
resistor. DCP2 and DCP3 are used for another channel of
dual ISL28272 correspondently (not shown in Figure 22).
More application examples can be found at
http://www.intersil.com/data/an/AN1145.pdf
16
FN6426.0
May 24, 2007