ISL55100A_14 Datasheet, PDF (13/14 Pages) Intersil Corporation – Quad 18V Pin Electronics Driver/Window Comparator

ISL55100A
Typical Performance Curves Device installed on Intersil ISL55100A Evaluation Board. (Continued)
VV_CECE
+ 6.0 VH 6.0
- 3.0 VL 0.0
VV_CEEC
12.0
- 3.0
VH
VL
6/8/10
0.0
0
0
20ns/DIV
FIGURE 19. FREQUENCY OF 10MHz = 50ns PATTERN RATE
0
10ns/DIV
FIGURE 20. MINIMUM PULSE WIDTH VH 6/8/10V
Revision History
The revision history provided is for informational purposes only and is believed to be accurate, but not warranted. Please go to the web to make sure that
you have the latest revision.
DATE
REVISION
CHANGE
December 4, 2014
FN7489.3
Update the datasheet throughout to Intersil’s new standard.
On page 2, updated the ordering information by adding MSL note.
On page 3, in “Pin Descriptions” table, added “This is also the potential of the exposed thermal pad on the
package bottom.” to the VEE row. Added “EP” row.
On page 4, under “Absolute Maximum Ratings”changed “DOUT” range from “VL – 0.5V” to “VEE - 0.5V”.
On page 9, changed a sentence in the 5th paragraph from “The maximum safe power temperature vs operating
frequency can be found graphically in Figure 18.” to “The junction temperature rise above ambient vs. operating
frequency can be found graphically in Figure 18.”
On page 9, edited “ESD Protection” paragraph.
On page 10, revised Figure 6 to represent actual ESD structures.
On page 12, changed the Y-axis label from “Temperature” to “Temperature Rise”.
Added Revision History and About Intersil sections.
About Intersil
Intersil Corporation is a leading provider of innovative power management and precision analog solutions. The company's products
address some of the largest markets within the industrial and infrastructure, mobile computing and high-end consumer markets.
For the most updated datasheet, application notes, related documentation and related parts, please see the respective product
information page found at www.intersil.com.
You may report errors or suggestions for improving this datasheet by visiting www.intersil.com/ask.
Reliability reports are also available from our website at www.intersil.com/support
For additional products, see www.intersil.com/en/products.html
Intersil products are manufactured, assembled and tested utilizing ISO9001 quality systems as noted
in the quality certifications found at www.intersil.com/en/support/qualandreliability.html
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time
without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be
accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third
parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see www.intersil.com
Submit Document Feedback 13
FN7486.3
December 4, 2014