ISL24211_14 Datasheet, PDF (12/12 Pages) Intersil Corporation – Programmable VCOM Calibrator with EEPROM and Output Buffer

ISL24211
Package Outline Drawing
L10.3x3A
10 LEAD THIN DUAL FLAT NO-LEAD PLASTIC PACKAGE
Rev 5, 3/10
3.00
A
6
PIN 1
INDEX AREA
B
6
PIN 1
INDEX AREA
2.0 REF
8X 0.50 BSC
1
5
10X 0 . 30
3.00
1.50
TOP VIEW
( 2.30 )
0.15 (4X)
10
2.30
BOTTOM VIEW
0.10 M C A B
5
0.05 M C
4 10 X 0.25
(2.90)
(1.50)
(10 X 0.50)
( 8X 0 .50 )
( 10X 0.25 )
TYPICAL RECOMMENDED LAND PATTERN
0 .80 MAX
SIDE VIEW
SEE DETAIL "X"
0.10 C
C
SEATING PLANE
0.08 C
5
0 . 2 REF
C
0 . 00 MIN.
0 . 05 MAX.
DETAIL "X"
NOTES:
1. Dimensions are in millimeters.
Dimensions in ( ) for Reference Only.
2. Dimensioning and tolerancing conform to ASME Y14.5m-1994.
3. Unless otherwise specified, tolerance : Decimal ± 0.05
Angular ±2.50°
4. Dimension applies to the metallized terminal and is measured
between 0.15mm and 0.30mm from the terminal tip.
5. Tiebar shown (if present) is a non-functional feature.
6. The configuration of the pin #1 identifier is optional, but must be
located within the zone indicated. The pin #1 identifier may be
either a mold or mark feature.
7. Compliant to JEDEC MO-229-WEED-3 except exposed pad length (2.30mm).
12
FN7585.0
February 23, 2011