ISL78010_14 Datasheet, PDF (1/19 Pages) Intersil Corporation – Automotive Grade TFT-LCD Power Supply

Data Sheet
December 4, 2013
ISL78010
FN6501.2
Automotive Grade TFT-LCD Power Supply
The ISL78010 is a multiple output regulator for use in all
TFT-LCD automotive applications. It features a single boost
converter with an integrated 2A FET, two positive LDOs for
V_ON and V_LOGIC generation, and a single negative LDO for
V_OFF generation. The boost converter can be programmed
to operate in either P-mode for optimal transient response or
PI-mode for improved load regulation.
The ISL78010 includes fault protection for all four channels.
Once a fault is detected on either the V_BOOST, V_ON or V_OFF
channels, the device is latched off until the input supply or
EN is cycled. If a fault is detected on the V_LOGIC channel,
the device is latched off until the input supply is cycled. The
V_LOGIC channel is not affected by the EN function.
The ISL78010 also includes an integrated start-up sequence
for V_LOGIC, V_BOOST, V_OFF, then V_ON or for V_LOGIC, V_OFF,
V_BOOST, and V_ON. The latter sequence requires a single
external transistor. The timing of the start-up sequence is set
using an external capacitor.
The ISL78010 comes in a 32 Ld 5x5 TQFP package and is
specified for operation over a -40°C to +105°C temperature
range. It is AEC-Q100 rated.
Ordering Information
PART NUMBER
(Notes 1, 2, 3)
PART
MARKING
PACKAGE
(Pb-free)
PKG.
DWG. #
ISL78010ANZ
78010 ANZ 32 Ld 5x5 TQFP Q32.5x5
ISL78010EVAL1Z Evaluation Board
1. Add “-T*” suffix for tape and reel. Please refer to TB347 for
details on reel specifications.
2. These Intersil Pb-free plastic packaged products employ special
Pb-free material sets, molding compounds/die attach materials,
and 100% matte tin plate plus anneal (e3 termination finish,
which is RoHS compliant and compatible with both SnPb and
Pb-free soldering operations). Intersil Pb-free products are MSL
classified at Pb-free peak reflow temperatures that meet or
exceed the Pb-free requirements of IPC/JEDEC J STD-020.
3. For Moisture Sensitivity Level (MSL), please see product
information page for ISL78010. For more information on MSL
please see techbrief TB363.
Features
• 2A current FET
• 3V to 5V input
• Up to 20V boost output
• 1% regulation on boost output
• V_LOGIC-V_BOOST-V_OFF-V_ON or
V_LOGIC-V_OFF-V_BOOST-V_ON sequence control
• Programmable sequence delay
• Fully fault protected
• Thermal shutdown
• Internal soft-start
• 32 Ld 5x5 TQFP packages
• AEC-Q100 Tested
• Pb-free (RoHS compliant)
Applications
• All Automotive LCD Displays
Pinout
ISL78010
(32 LD 5x5 TQFP)
TOP VIEW
NC
NC
DELB
NC
LX
NC
DRVP
NC
1
32 31
30
29
28
27
26
25
24
2
23
3
22
4
21
5
20
6
19
7
18
8
17
9 10 11 12 13 14 15 16
VREF
NC
PGND
PGND
PGND
PGND
NC
FBN
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Copyright Intersil Americas LLC 2007, 2011, 2013. All Rights Reserved
Intersil (and design) is a trademark owned by Intersil Corporation or one of its subsidiaries.
All other trademarks mentioned are the property of their respective owners.