HCS32MS_07 Datasheet, PDF (1/11 Pages) Intersil Corporation – Radiation Hardened Quad 2-Input OR Gate

®
Data Sheet
April 11, 2007
HCS32MS
FN3057.1
Radiation Hardened Quad 2-Input OR
Gate
The Intersil HCS32MS is a Radiation Hardened Quad 2-Input
OR Gate. A low on both inputs forces the output to a low state.
The HCS32MS utilizes advanced CMOS/SOS technology to
achieve high-speed operation. This device is a member of the
radiation hardened, high-speed, CMOS/SOS Logic Family.
The HCS32MS is supplied in a 14 Ld Ceramic flatpack
(K suffix) or a SBDIP Package (D suffix).
Ordering Information
PART
PART
TEMP.
NUMBER MARKING RANGE (°C)
PKG.
PACKAGE DWG. #
HCS32DMSR Q 5962R95 -55°C to +125°C 14 Ld SBDIP D14.3
78101VCC
HCS32KMSR Q 5962R95 -55°C to +125°C 14 Ld Ceramic K14.A
78101VXC
Flatpack
HCS32D/
Sample
+25°C
14 Ld SBDIP
HCS32K/
Sample
+25°C
14 Ld Ceramic
Flatpack
HCS32HMSR
+25°C
Die
Intersil Pb-free hermetic packaged products employ SnAgCu or Au
termination finish, which are RoHS compliant termination finishes and
compatible with both SnPb and Pb-free soldering operations. Ceramic
dual in-line packaged products (CerDIPs) do contain lead (Pb) in the
seal glass and die attach glass materials. However, lead in the glass
materials of electronic components are currently exempted per the
RoHS directive. Therefore, ceramic dual inline packages with Pb-free
termination finish are considered to be RoHS compliant.
Features
• 3 Micron Radiation Hardened SOS CMOS
• Total Dose 200k RAD (Si)
• SEP Effective LET No Upsets: >100 MEV-cm²/mg
• Single Event Upset (SEU) Immunity < 2 x 10^-9
Errors/Bit-Day (Typ)
• Latch-Up Free Under Any Conditions
• Military Temperature Range: -55°C to +125°C
• Significant Power Reduction Compared to LSTTL ICs
• DC Operating Voltage Range: 4.5V to 5.5V
• Input Logic Levels
• V_IL = 30% of V_CC Max
• V_IH = 70% of V_CC Min
• Input Current Levels I_i ≤ 5µA @ VOL, VOH
Functional Diagram
An
(1, 4, 9, 12)
Yn
(3, 6, 8, 11)
Bn
(2, 5, 10, 13)
TABLE 1. TRUTH TABLE
INPUTS
OUTPUTS
An
Bn
Yn
L
L
L
L
H
H
H
L
H
H
H
H
NOTE: L = Logic Level Low, H = Logic level High
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 1995, 2007. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.