DG406_06 Datasheet, PDF (1/13 Pages) Intersil Corporation – Single 16-Channel/Differential 8-Channel, CMOS Analog Multiplexers

®
Data Sheet
DG406, DG407
March 13, 2006
FN3116.9
Single 16-Channel/Differential 8-Channel,
CMOS Analog Multiplexers
The DG406 and DG407 monolithic CMOS analog
multiplexers are drop-in replacements for the popular
DG506A and DG507A series devices. They each include an
array of sixteen analog switches, a TTL and CMOS
compatible digital decode circuit for channel selection, a
voltage reference for logic thresholds, and an ENABLE input
for device selection when several multiplexers are present.
These multiplexers feature lower signal ON resistance
(<100Ω) and faster transition time (t_TRANS < 300ns)
compared to the DG506A and DG507A. Charge injection
has been reduced, simplifying sample and hold applications.
The improvements in the DG406 series are made possible
by using a high voltage silicon-gate process. An epitaxial
layer prevents the latch-up associated with older CMOS
technologies. The 44V maximum voltage range permits
controlling 30V_P-P signals when operating with ±15V power
supplies.
The sixteen switches are bilateral, equally matched for AC or
bidirectional signals. The ON resistance variation with
analog signals is quite low over a ±5V analog input range.
Pinouts
DG406 (PDIP, SOIC)
TOP VIEW
DG407 (PDIP, SOIC)
TOP VIEW
V+ 1
NC 2
NC 3
S₁₆ 4
S₁₅ 5
S₁₄ 6
S₁₃ 7
S₁₂ 8
S₁₁ 9
S₁₀ 10
S₉ 11
GND 12
NC 13
A₃ 14
28 D V+ 1
27 V- D_B 2
26 S₈ NC 3
25 S₇ S_8B 4
24 S₆ S_7B 5
23 S₅ S_6B 6
22 S₄ S_5B 7
21 S₃ S_4B 8
20 S_{2 S3B 9}
19 S_{1 S2B 10}
18 EN _{S1B 11}
17 A_{0 GND 12}
16 A_{1 NC 13}
15 A_{2 NC 14}
28 D_A
27 V-
26 S_8A
25 S_7A
24 S_6A
23 S_5A
22 S_4A
21 S_3A
20 S_2A
19 S_1A
18 EN
17 A₀
16 A₁
15 A₂
Features
• ON-Resistance (Max). . . . . . . . . . . . . . . . . . . . . . . . 100Ω
• Low Power Consumption (P_D) . . . . . . . . . . . . . . . <1.2mW
• Fast Transition Time (Max) . . . . . . . . . . . . . . . . . . . . 300ns
• Low Charge Injection
• TTL, CMOS Compatible
• Single or Split Supply Operation
• Pb-Free Plus Anneal Available (RoHS Compliant)
Applications
• Battery Operated Systems
• Data Acquisition
• Medical Instrumentation
• Hi-Rel Systems
• Communication Systems
• Automatic Test Equipment
Related Literature
• Technical Brief TB363 “Guidelines for Handling and
Processing Moisture Sensitive Surface Mount Devices
(SMDs)”
Ordering Information
PART
NUMBER
PART
TEMP.
PKG.
MARKING RANGE (°C) PACKAGE DWG. #
DG406DJ
DG406DJ
-40 to 85 28 Ld PDIP E28.6
DG406DJZ
(See Note)
DG406DJZ
-40 to 85 28 Ld PDIP* E28.6
(Pb-free)
DG406DY
DG406DY
-40 to 85 28 Ld SOIC M28.3
DG406DY-T DG406DY 28 Ld SOIC Tape and Reel M28.3
DG406DYZ
(See Note)
DG406DYZ
-40 to 85 28 Ld SOIC M28.3
(Pb-free)
DG406DYZ-T DG406DYZ 28 Ld SOIC Tape and Reel M28.3
(See Note)
(Pb-free)
DG407DJ
DG407DJ
-40 to 85 28 Ld PDIP E28.6
DG407DJZ
(Note)
DG407DJZ
-40 to 85 28 Ld PDIP* E28.6
(Pb-free)
DG407DY
DG407DY
-40 to 85 28 Ld SOIC M28.3
DG407DYZ
(Note)
DG407DYZ
-40 to 85 28 Ld SOIC M28.3
(Pb-free)
*Pb-free PDIPs can be used for through hole wave solder processing only. They are
not intended for use in Reflow solder processing applications.
NOTE: Intersil Pb-free plus anneal products employ special Pb-free material sets;
molding compounds/die attach materials and 100% matte tin plate termination
finish, which are RoHS compliant and compatible with both SnPb and Pb-free
soldering operations. Intersil Pb-free products are MSL classified at Pb-free peak
reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J
STD-020.
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2000, 2003, 2004, 2006. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.