FMGA-461_15 Datasheet, PDF (7/14 Pages) Interpoint Corporation Company – FMSA/FMGA EMI Input Filters 28 Volt Input - 0.8 AMP

Crane Aerospace & Electronics Power Solutions
FMSA/FMGA EMI Input Filters
28 Volt Input - 0.8 AMP
model numbering key
Base Model
FMGA - 461 Z / 883
MIL-STD-461 Reference
Gull Wing Lead Option
(Straight leaded filter has no designator
in this position.)
Screening
(Standard screening has no designator
in this position.)
DLA DRAWING Numbers
DLA Drawing (5915)
FMGA Similar Part
96003-01HYX
FMGA-461/883
96003-01HZA
FMGA-461Z/883
For exact specifications for a DLA Drawing product, refer to the
DLA Drawing. DLA Drawings can be downloaded from:
http://www.landandmaritime.dla.mil/programs/smcr
Table 9: DLA Drawing Number Cross Reference
Table 8: Model Numbering Key
Category
model Number Options
To determine the model number enter one option from
each category in the form below.
Base Model
Surface Mountable Lead
Configuration ¹
Screening ²
(standard “flat” case B, leave blank)
(standard, leave blank)
Options
FMGA-461
Z (solder-dipped gull wings)
ES
883
Fill in for
Model #
FMGA-461
/
Notes
1. Case B, standard “flat” case, does not require a case designator in the model number. Case B with solder-dipped gull wings requires “Z” in
the case designator position of the model number.
2. Screening: For standard screening leave the screening option blank. For other screening options, insert the desired screening level. For
more information see Table 11 on page 20 and Table 12 on page 21.
Table 10: Model Number Options
www.craneae.com/interpointcom
Page 7 of 14
FMSA/FMGA Rev AA - 2015.12.15