FMGA-461_15 Datasheet, PDF (5/14 Pages) Interpoint Corporation Company – FMSA/FMGA EMI Input Filters 28 Volt Input - 0.8 AMP

Pin Out FMSA
Pin
1
2, 3
4
5, 6
7
8
Designation
Positive Input
Positive Output
Case Ground
Output Common
Input Common
Case Ground
Table 1: FMSA Pin Out
Crane Aerospace & Electronics Power Solutions
FMSA/FMGA EMI Input Filters
28 Volt Input - 0.8 AMP
Pins not in Use FMSA
Case Ground Connect pin to case for
(4)
optimum filtering.
Table 2: FMSA Pins Not in Use
Squared corner and
dot on top of cover
indicate pin one.
1
23
8
BOTTOM
VIEW
4
FMSA
7
65
For dimensions, see case A1,
Figure 15 on page 11.
Figure 5: FMSA Pin Out
Pin Out FMGA
Pin
1, 2
3, 4
5, 6
7, 8, 9
10, 11, 12
13, 14
15, 16
17, 18
Designation
Positive Input
No connection
Case Ground
Positive Output
Output common
Case Ground
No connection
Input Common
To meet specified performance, all pins must
be connected except “No Connection” pins.
Table 3: FMGA Pin Out
Pins not in Use FMGA
Case Ground Connect pins to case for
(5, 6, 13, 14) optimum filtering.
No connection Connect pins to case for
(3, 4, 15, 16) optimum filtering.
Table 4: FMGA Pins Not in Use
1
18
2
17
3
16
4
5
TOP VIEW
15
14
6
FMGA
13
7
12
8
11
9
10
Differently colored glass bead around pin one or dimple in
header (bottom or side of case) indicates pin one.
Cover marking is oriented with pin one at the upper right corner.
For dimensions and the gull-wing lead option, see
case B Figure 16 on page 12. For solder pad
layout, see case B, Figure 17 on page 12
Figure 6: FMGA Pin Out
www.craneae.com/interpointcom
Page 5 of 14
FMSA/FMGA Rev AA - 2015.12.15