FMCE-0528 Datasheet, PDF (4/10 Pages) Interpoint Corporation Company – Attenuation to 60 dB at 500 kHz, typical Operating temperature -55° to +125°C

Crane Aerospace & Electronics Power Solutions
FMCE-0528 EMI Input Filters
28 Volt Input – 5 Amp
model numbering key
Base Model
FMCE - 05 28 - TR - F / 883
Output Current
Input Voltage
Transorb Option
(Standard FMCE-0528 (no transorb) has no
designator in this position)
Case Option
(Non-flanged case has no designator in
this position)
Screening
(Standard screening has no designator
in this position.)
DSCC Numbers
DSCC Drawing (5915) FMCE-0528 Similar Part ¹
10016-02HXC
FMCE-0528/883
10016-01HXC
FMCE-0528-TR/883
10016-02HZC
FMCE-0528-F/883
10016-01HZC
FMCE-0528-TR-F/883
1. Models with “TR” have a transorb (-01 in the DSCC numbers).
For exact specifications for a DSCC product, refer to the DSCC
drawing. DSCC drawings can be downloaded from: http://www.
dscc.dla.mil/programs/smcr
model selection
On the lines below, enter one selection from under each category
to determine the model number.
Category
FMCE-0528
–
Base Model and
Input Voltage
_______
TRansorb
option ¹
–
_______
/
Case/Lead
option ²
______
Screening ³
Selection
“FMCE-0528” is the
only available selec-
tion
(NO TRANSORB leave
blank)
TR
(with transorb)
(NON-FLANGED
leave blank)
F
(flanged)
Standard (leave blank)
ES
883 (Class H, QML)
1. Transorb Option: For the standard filter (no transorb) leave the transorb option blank. For a filter with the transorb, insert the letters TR in the TR Option position.
2. Case Options: For the standard case, case H1, leave the case option blank. For the flanged case option, case K2, insert the letter F in the Case Option position.
3. Screening: For standard screening leave the screening option blank. For other screening options, insert the desired screening level. For more information see
Screening Tables 1 and 2.
www.interpoint.com
Page 4 of 10
FMCE-0528 Rev D - 20100413