FME270-461_10 Datasheet, PDF (3/11 Pages) Interpoint Corporation Company – Attenuation to 50 dB at 500 kHz Operating temperature -55° to +125°C

Crane Aerospace & Electronics Power Solutions
FME270-461 EMI Input Filters
270 Volt Input – 1.5 Amp
Pin Out
Pin ¹
1, 2, 3
4, 5, 6
7, 8, 9
10, 11, 12
—
Designation
Positive Input
Input Common
Output Common
Positive Output
Case Ground ²
Notes
1. All pins must be connected.
2. The baseplate is the only case ground connection and
should directly contact chassis ground.
Angled corner and cover marking indicate pin one for cases U and V.
Cover marking indicates pin one for cases W, Y and Z.
TOP VIEW
1
All FME270 models/cases
12
2
11
3 _{Outline shown is case U, pin out is the same}
10
for all cases. See cases U, V, W, Y, and Z
4 _{for dimensions.}
9
5
8
6
7
Figure 3: Pin Out
www.interpoint.com
Page 3 of 11
FME270 Rev B - 20100226