FME270-461_10 Datasheet, PDF (10/11 Pages) Interpoint Corporation Company – Attenuation to 50 dB at 500 kHz Operating temperature -55° to +125°C

Crane Aerospace & Electronics Power Solutions
FME270-461 EMI Input Filters – Cases
270 Volt Input – 1.5 Amp
TOP VIEW CASE Z*
Tabbed case, down-leaded
*Designator “Z” required in Case Option position of model number.
1.750 (44.45)
1.625
(41.28)
2.000
(50.80)
1.375
(34.93)
1.175
(29.85
0.975
(24.77)
0.775
(19.69)
0.575
(14.61)
0.375
(9.53)
0.125
(3.18)
0.000
0.250 (6.35) Typ.
1
2
3
4
5
6
0.250 (6.35)
Typ.
0.140 dia
(3.56)
0.040 dia
12
(1.02)
11
10
9
8
7
Seam Seal
Case dimensions in inches (mm)
Tolerance ±0.005 (0.13) for three decimal places
±0.01 (0.3) for two decimal places
unless otherwise specified
Lead Detail
0.150 (3.81)
0.400 (10.16) max.
CAUTION
Heat from reflow or wave soldering may damage
the device. Solder pins individually with heat
application not exceeding 300°C for 10 seconds per pin.
0.220 (5.59)
0.000
Materials
Header Cold Rolled Steel/Nickel/Gold
Cover Kovar/Nickel
Pins
#52 alloy/Gold, compresssion glass seal
Seal Hole: 0.120 ±0.002 (3.05 ±0.05)
0.36 ±0.05
(9.1±0.13)
2.80 (71.1) Reference
(lead center to lead center)
Case Z, Rev E, 20100401
Please refer to the numerical dimensions for accuracy. All information is believed to
be accurate, but no responsibility is assumed for errors or omissions. Interpoint
reserves the right to make changes in products or specifications without notice.
Copyright © 1999-2010 Interpoint Corp. All rights reserved.
Figure 8: Case Z - FME270-461Z
www.interpoint.com
Page 10 of 11
FME270 Rev B - 20100226