English
Language : 

SLH28 Datasheet, PDF (10/12 Pages) Interpoint Corporation Company – SLH Single and Dual DC-DC Converters
Crane Aerospace & Electronics Power Solutions
SLH Single and Dual DC-DC Converters
28 Volt input – 1.5 Watt
BOTTOM VIEW CASE A2
Projection Weld
0.805 max. (20.45)
0.697 (17.70)
0.018 ± 0.002 dia.
(0.46 ± 0.05)
Squared corner and dot on
top of case indicate pin one.
12 3
4
7
0.097 (2.46)
0.000
6
5
Weight: 12 grams typical
Case dimensions in inches (mm)
Tolerance ±0.005 (0.13) for three decimal places
±0.01 (0.3) for two decimal places
unless otherwise specified
CAUTION
Solder pins individually with heat application not exceeding
300°C for 10 seconds per pin.
Materials
Header Kovar/Nickel/Gold
Cover Kovar/Nickel
Pins
Kovar/Nickel/Gold matched glass seal
Gold plating of 50 - 225 microinches
included in pin diameter
Seal hole: 0.056 ±0.001 (1.42 ±0.03)
Case A2, Rev G, 2013.05.07
Please refer to the numerical dimensions for accuracy.
Figure 22: Case A2
www.craneae.com/interpoint
Page 10 of 12
SLH Rev AB - 2015.10.22