XC2261N Datasheet, PDF (91/130 Pages) Infineon Technologies AG – 16/32-Bit Single-Chip Microcontroller with 32-Bit Performance

XC2261N, XC2263N, XC2264N, XC2265N, XC2268N
XC2000 Family / Value Line
Electrical Parameters
4.5
System Parameters
The following parameters specify several aspects which are important when integrating
the XC226xN into an application system.
Note: These parameters are not subject to production test but verified by design and/or
characterization.
Note: Operating Conditions apply.
Table 22 Various System Parameters
Parameter
Symbol
Values
Unit Note /
Min. Typ. Max.
Test Condition
Short-term deviation of Δf_INT CC -1
−
1
%
internal clock source
frequency¹⁾
Internal clock source
frequency
f_INT CC 4.8
5.0
5.2
MHz
Wakeup clock source
frequency²⁾
f_WU CC 400 500 600 kHz FREQSEL= 00
210 270 330 kHz FREQSEL= 01
140 180 220 kHz FREQSEL= 10
110 140 170 kHz FREQSEL= 11
Startup time from standby t_SSB CC 2.6
3.8
4.1
ms f_WU= 140 kHz
mode with code execution
from Flash
1.6
2.1
2.5
ms f_WU= 500 kHz
Startup time from stopover t_SSO CC 11 / −
mode with code execution
f_WU3)
from PSRAM
12 / μs
f_WU3)
Core voltage (PVC)
supervision level
V_PVC CC V_LV - V_LV
V_LV + V
5)
0.03
0.07⁴⁾
Supply watchdog (SWD) V_SWD
supervision level
CC
V_LV - V_LV
0.10⁶⁾
V_LV + V
0.15
voltage_range=
lower ⁵⁾
V_LV - V_LV
0.15
V_LV + V
0.15
voltage_range=
upper ⁵⁾
1) The short-term frequency deviation refers to a timeframe of 20 ms and is measured relative to the current
frequency at the beginning of the respective timeframe
2) This parameter is tested for the fastest and the slowest selection. The medium selections are not subject to
production test - verified by design/characterization
3) f_WU in MHz
4) This value includes a hysteresis of approximately 50 mV for rising voltage.
Data Sheet
91
V1.3, 2010-04