XC2261N Datasheet, PDF (9/130 Pages) Infineon Technologies AG – 16/32-Bit Single-Chip Microcontroller with 32-Bit Performance

XC2261N, XC2263N, XC2264N, XC2265N, XC2268N
XC2000 Family / Value Line
Summary of Features
Ordering Information
The ordering code for an Infineon microcontroller provides an exact reference to a
specific product. This ordering code identifies:
• the derivative itself, i.e. its function set, the temperature range, and the supply voltage
• the temperature range:
– SAF-…: -40°C to 85°C
– SAK-…: -40°C to 125°C
• the package and the type of delivery.
For ordering codes for the XC226xN please contact your sales representative or local
distributor.
This document describes several derivatives of the XC226xN group:
Basic Device Types are readily available and
Special Device Types are only available on request.
As this document refers to all of these derivatives, some descriptions may not apply to a
specific product, in particular to the special device types.
For simplicity the term XC226xN is used for all derivatives throughout this document.
1.1
Basic Device Types
Basic device types are available and can be ordered through Infineon’s direct and/or
distribution channels. The devices are available for the SAK temperature range only.
Table 1
Synopsis of XC226xN Basic Device Types
Derivative¹⁾
Flash
PSRAM Capt./Comp. ADC⁴⁾ Interfaces⁴⁾
Memory²⁾ DSRAM³⁾ Modules
Chan.
XC2263N-24F40L 192 Kbytes 8 Kbytes CC2
8 Kbytes CCU60/1
11 + 5 1 CAN Node,
4 Serial Chan.
XC2263N-40F80L 320 Kbytes 16 Kbytes CC2
16 Kbytes CCU60/1
11 + 5 1 CAN Nodes,
4 Serial Chan.
XC2265N-40F80L 320 Kbytes 16 Kbytes CC2
16 Kbytes CCU60/1
11 + 5 3 CAN Nodes,
6 Serial Chan.
XC2268N-40F80L 320 Kbytes 16 Kbytes CC2
16 Kbytes CCU60/1
11 + 5 6 CAN Nodes,
6 Serial Chan.
1) The 80 MHz type is marked ...80L. The 40 MHz type is marked ...40L.
2) Specific information about the on-chip Flash memory in Table 3.
3) All derivatives additionally provide 8 Kbytes SBRAM and 2 Kbytes DPRAM.
4) Specific information about the available channels in Table 5.
Analog input channels are listed for each Analog/Digital Converter module separately (ADC0 + ADC1).
Data Sheet
9
V1.3, 2010-04