TLE42694_14 Datasheet, PDF (9/33 Pages) Infineon Technologies AG – Low Dropout Fixed Voltage Regulator

4
General Product Characteristics
TLE42694
General Product Characteristics
4.1
Absolute Maximum Ratings
Table 4 Absolute Maximum Ratings¹⁾
-40 °C ≤ T_j ≤ 150 °C; all voltages with respect to ground, positive current flowing into pin (unless otherwise
specified)
Parameter
Symbol
Values
Unit Note / Test Condition Number
Min. Typ. Max.
Input, Sense Input
Voltage
V_I, V_SI
-40
–
45 V
–
Output, Reset Output, Sense Output, Reset Delay
P_4.1.1
Voltage
Reset Threshold
V_Q, V_RO, -0.3 –
7
V_SO, V_D
V
–
P_4.1.2
Voltage
Current
Temperature
V_RADJ
I_RADJ
-0.3 –
-10 –
7
V
–
10 mA –
P_4.1.3
P_4.1.4
Junction Temperature
T_j
-40 –
Storage Temperature
T_stg
-50 –
ESD Susceptibility
Human Body Model (HBM)²⁾
Voltage -2
–
Charged Device Model (CDM)³⁾ Voltage -1
–
150 °C –
150 °C –
2
kV –
1
kV –
P_4.1.5
P_4.1.6
P_4.1.7
P_4.1.8
1) not subject to production test, specified by design
2) ESD HBM Test according to AEC-Q100-002 - JESD22-A114
3) ESD CDM Test according to ESDA ESD-STM5.3.1
Note: Maximum ratings are absolute ratings; exceeding any one of these values may cause irreversible damage
to the integrated circuit. Integrated protection functions are designed to prevent IC destruction under fault
conditions. Fault conditions are considered as outside normal operating range. Protections functions are not
designed for continuous repetitive operation.
Data Sheet
9
Rev. 1.3, 2014-07-03