|
TLE9262-3QX Datasheet, PDF (7/197 Pages) Infineon Technologies AG – Dedicated Data Sheets are available for the different product variants | |||
|
◁ |
TLE9262-3QX
Overview
Key Features
⢠Very low quiescent current consumption in Stop- and Sleep Mode
⢠Periodic Cyclic Wake in SBC Normal- and Stop Mode
⢠Periodic Cyclic Sense in SBC Normal-, Stop- and Sleep Mode
⢠Low-Drop Voltage Regulator 5V, 250mA
⢠Low-Drop Voltage Regulator 5V, 100mA, protected features for off-board usage
⢠Low-Drop Voltage Regulator, driving an external PNP transistor - 5V in load sharing configuration or 5V/3.3V
in stand-alone configuration, protected features for off-board usage. Current limitation by shunt resistor (up to
350mA with 470m⦠external shunt resistor) in stand-alone configuration
⢠High-Speed CAN Transceiver:
â fully compliant to ISO11898-2 and ISO11898-5
â fully compliant to ISO11898-6 (Partial Networking) inclunding CAN FD tolerant feature
â suitable for chokeless operation up to 500kbps
â supporting CAN FD communication up to 2 Mbps
⢠LIN Transceiver LIN 2.2, J2602 with configurable TXD timeout feature and LIN Flash Mode
⢠Fully compliant to âHardware Requirements for LIN, CAN and FlexRay Interfaces in Automotive Applicationsâ
Revision 1.3, 2012-05-04
⢠Four High-Side Outputs 7⦠typ.
⢠Dedicated supply pin for High-Side Outputs
⢠Two General Purpose High-Voltage In- and Outputs (GPIOs) configurable as add. Fail Outputs, Wake Inputs,
Low-Side switches or High-Side switches
⢠Three universal High-Voltage Wake Inputs for voltage level monitoring
⢠Alternate High-Voltage Measurement Function, e.g. for battery voltage sensing
⢠Configurable wake-up sources
⢠Reset Output
⢠Configurable timeout and window watchdog
⢠Up to three Fail Outputs (depending on configuration)
⢠Over temperature and short circuit protection feature
⢠Wide supply input voltage and temperature range
⢠Software compatible to all SBC families TLE926x and TLE927x
⢠Green Product (RoHS compliant) & AEC Qualified
⢠PG-VQFN-48 leadless exposed-pad power package with Lead Tip Inspection (LTI) feature to support
Automatic Optical Inspection (AOI)
Data Sheet
7
Rev. 1.1, 2014-09-26
|
▷ |