TLE9262-3QX Datasheet, PDF (177/197 Pages) Infineon Technologies AG – Dedicated Data Sheets are available for the different product variants

TLE9262-3QX
Serial Peripheral Interface
5. CANTO is set asynchronously to the INT pulse. In order to prevent undesired clearing of CANTO and thus
possibly missing this interrupt, the bit will be prevented from clearing (i.e. cannot be cleared) until the next
falling edge of INT.
WK_STAT_1
Wake-up Source and Information Status (Address 100 0110_B)
POR / Soft Reset Value: 0000 0000_B; Restart Value: 0xxx 0xxx_B
7
6
5
4
3
2
1
0
Reserved
r
LIN1_WU
rc
CAN_WU TIMER_WU Reserved
rc
rc
r
WK3_WU WK2_WU
r
rc
rc
WK1_WU
rc
Field
Bits
Reserved 7
LIN1_WU 6
CAN_WU 5
TIMER_WU 4
Reserved 3
WK3_WU 2
WK2_WU 1
WK1_WU 0
Type
r
rc
rc
rc
r
rc
rc
rc
Description
Reserved, always reads as 0
Wake up via LIN1 Bus
0_B , No Wake up
1_B , Wake up
Wake up via CAN Bus
0_B , No Wake up
1_B , Wake up
Wake up via TimerX
0_B , No Wake up
1_B , Wake up
Reserved, always reads as 0
Wake up via WK3
0_B , No Wake up
1_B , Wake up
Wake up via WK2
0_B , No Wake up
1_B , Wake up
Wake up via WK1
0_B , No Wake up
1_B , Wake up
Note: The respective wake source bit will also be set when the device is woken from SBC Fail-Safe Mode
Data Sheet
177
Rev. 1.1, 2014-09-26