TLE7273-2_14 Datasheet, PDF (6/26 Pages) Infineon Technologies AG – Low Dropout Voltage Regulator

TLE7273-2
General Product Characteristics
4
General Product Characteristics
4.1
Absolute Maximum Ratings
Table 3 Absolute Maximum Ratings¹⁾
T_j = -40 °C to +150 °C
Pos. Parameter
Symbol Limit Values Unit Remarks
Min. Max.
Input I
4.1.1 Voltage
V_I
-0.3 45
V
–
Output Q, Reset Output RO, Watchdog Mode 2
4.1.2 Voltage
4.1.3 Voltage
Enable Input EN
V_Q
-0.3 5.5
V
V_Q
-0.3 6.2
V
permanent
t < 10 s²⁾
4.1.4 Voltage
4.1.5 Current
Watchdog Input WDI
V_EN
-1
I_EN
-1
45
V
–
1
mA –
4.1.6 Voltage
Watchdog Mode 1
V_RO
-1
7
V
permanent
4.1.7 Voltage
4.1.8 Voltage
4.1.9 Current
ESD Susceptibility
4.1.10 Human Body Model (HBM)³⁾
4.1.11 Charged Device Model (CDM)⁴⁾
V_WM1 -0.3
5.5
V_WM1 -0.3
6.2
I_WM1
-5
5
Voltage -
3
Voltage -
1.5
V
permanent
V
t < 10 s²⁾
mA –
kV
–
kV
–
Temperatures
4.1.12 Junction Temperature
T_j
-40
150 °C
–
4.1.13 Storage Temperature
T_stg
-50
150 °C
–
1) not subject to production test, specified by design
2) exposure to these absolute maximum ratings for extended periods (t > 10 s) may affect device reliability
3) ESD HBM Test according JEDEC JESD22-A114
4) ESD CDM Test according AEC/ESDA ESD-STM5.3.1-1999
Note: Maximum ratings are absolute ratings; exceeding any one of these values may cause irreversible damage
to the integrated circuit. Integrated protection functions are designed to prevent IC destruction under fault
conditions. Fault conditions are considered as outside normal operating range. Protections functions are not
designed for continuous repetitive operation.
Data Sheet
6
Rev. 1.21, 2014-11-19