TLE7273-2_14 Datasheet, PDF (14/26 Pages) Infineon Technologies AG – Low Dropout Voltage Regulator

TLE7273-2
Block Description and Electrical Characteristics
Electrical Characteristics
V_I =13.5 V; T_j = – 40 °C to +150 °C; unless otherwise specified
Pos. Parameter
Symbol Limit Values
Unit Test Condition
Min. Typ. Max.
5.2.58 Reset Output Low Level Voltage
5.2.59 Reset Output High Level Voltage
V_ROL
V_ROH
– 0.15 0.25 V
4.5 –
–
V
V_Q ≥ 1 V;
I_RO < 200 µA
TLE7273-2GV50,
TLE7273-2EV50
5.2.60 Reset High Level Leakage Current I_ROLK –
–
1
µA TLE7273-2GV33
TLE7273-2GV26
5.2.61 Integrated Reset Pull Up Resistor R_RO
5.2.62 Power-On Reset Delay Time
t_RD
5.2.63
10 20 40 kΩ
12.8 16.0 19.2 ms
25.6 32.0 38.4 ms
TLE7273-2GV50,
TLE7273-2EV50
internally connected to V_Q
Fast Reset Timing
Slow Reset Timing
5.2.64 Reset Reaction Time
t_RR
-
4
12 µs
1) measured when the output voltage has dropped 100 mV from the nominal value obtained at V_I = 13.5 V
2) recommendation for typical trigger time; t_WD = t_CW + 1/2*t_OW
3) reset output triggered when output voltage V_Q is lower than output voltage reset switching threshold V_RT or is also triggered,
when input voltage is decreasing to V_I < 4.0 V and V_Q > V_RT
Data Sheet
14
Rev. 1.21, 2014-11-19