TLE4925 Datasheet, PDF (5/25 Pages) Infineon Technologies AG – Differential Hall Sensor

PRELIMINARY
1.1 Absolute Maximum Ratings
No.
Parameter
Symbol ^{min Typ max Unit}
Remarks
1.1.1
Supply voltage
V_S
-18
-24
-26
-28
18
V-
24
V 1h with R_Series ≥ 200Ω¹
26
V 5min with R_Series ≥ 200Ω¹
28
V _{1min with RSeries ≥ 200Ω}¹
1.1.2
Supply current
I_S
-10
1.1.3 Output OFF voltage
V_Q
-0.3
-0.3
-0.3
-1.0
25 mA -
18
V-
24
V 1h with R_Load ≥ 500Ω
26
V 5min with R_Load ≥ 500Ω
-
V _{1h (protected by internal}
series resistor)
1.1.4 Output ON voltage
V_Q
-
16
V Current internal limited by
short circuit protection
(72h @ T_A < 40°C).
-
18
V Current internal limited by
short circuit protection
(1h @ T_A < 40°C).
-
24
V _{Current internal limited by}
short circuit protection
(1min @ T_A < 40°C).
1.1.5 Continuous output
I_Q
-50
current
50 mA -
1.1.6 Junction temperature T_j
-40
°C -
155 °C 2000h (not additive)
165 °C 1000h (not additive)
175 °C 168 h (not additive)
195 °C 3 x1 h (additive to the
other life times).
1.1.7 Storage temperature T_S
-40
1.1.8 Thermal resistance R_{th JA}
junction-air for
150 °C -
190 K/W Lower values are possible
with overmoulded devices.
P-SSO-3-6
P-SSO-3-9
Note: Stresses above those listed here may cause permanent damage to the device. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
1 _{Accumulated life time.}
Page 5 of 25