SAB80C166W Datasheet, PDF (47/67 Pages) Siemens Semiconductor Group – C16x-Family of High-Performance CMOS 16-Bit Microcontrollers

SAB 80C166W/83C166W
Notes
1) _{This specification does not apply to the analog input (Port 5.x) which is currently converted.}
3) _{The maximum current may be drawn while the respective signal line remains inactive.}
4) _{The minimum current must be drawn in order to drive the respective signal line active.}
5) _{This specification is only valid during Reset, or during Hold-mode.}
6) _{Not 100% tested, guaranteed by design characterization.}
7) _{The supply current is a function of the operating frequency. This dependency is illustrated in the figure below.}
These parameters are tested at 20 MHz CPU clock with all outputs open.
8) _{This parameter is tested including leakage currents. All inputs (including pins configured as inputs) at 0 V to}
0.1 V or at V_CC – 0.1 V to V_CC, V_REF = 0 V, all outputs (including pins configured as outputs) disconnected.
A voltage of V_CC ≥ 2.5 V is sufficient to retain the content of the internal RAM during power down mode.
Figure 8
Supply/Idle Current as a Function of Operating Frequency
Semiconductor Group
47