GTVA261701FA_15 Datasheet, PDF (4/4 Pages) Infineon Technologies AG – Thermally-Enhanced High Power RF GaN HEMT

GTVA261701FA V1
Revision History
Revision Date
Data Sheet Type Page
01
2015-05-29
Advance
All
Subjects (major changes since last revision)
Data Sheet reflects advance specification for product development
i ^{o n} _{We Listen to Your Comments}
t _{Any information within this document that you feel is wrong, unclear or missing at all?}
Your feedback will help us to continuously improve the quality of this document.
a _{Please send your proposal (including a reference to this document) to:}
[e-mail]
c _{To request other information, contact us at:}
i _{[phone] (1-877-GO-LDMOS) USA}
s ^{p e c i f or [phone] International}
Edition 2015-05-29
Published by
e ^{Infineon Technologies AG}
85579 Neubiberg, Germany
c ^{© 2015 Infineon Technologies AG}
All Rights Reserved.
n _{Legal Disclaimer}
The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics.
a _{With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the}
application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind,
v including without limitation, warranties of non-infringement of intellectual property rights of any third party.
Information
d _{For further information on technology, delivery terms and conditions and prices, please contact the nearest}
a^{Infineon Technologies Office (www.infineon.com/rfpower).}
Warnings
Due to technical requirements, components may contain dangerous substances. For information on the types in question,
please contact the nearest Infineon Technologies Office.
Infineon Technologies components may be used in life-support devices or systems only with the express written approval of In-
fineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device
or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be
implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is
reasonable to assume that the health of the user or other persons may be endangered.
Advance Specification
4 of 4
Rev. 01, 2015-05-29