|
C517A Datasheet, PDF (4/72 Pages) Siemens Semiconductor Group – 8-Bit CMOS Microcontroller | |||
|
◁ |
C517A
Features (continued) :
⢠Two full duplex serial interfaces (USART)
â 4 operating modes, fixed or variabie baud rates
â programmable baud rate generators
⢠Four 16-bit timer/counters
â Timer 0 / 1 (C501 compatible)
â Timer 2 for 16-bit reload, compare, or capture functions
â Compare timer for compare/capture functions
⢠Powerful 16-bit compare/capture unt (CCU) with up to 21 high-speed or PWM output channels
and 5 capture inputs
⢠10-bit A/D converter
â 12 multiplexed analog inputs
â Built-in self calibration
⢠Extended watchdog facilities
â 15-bit programmable watchdog timer
â Oscillator watchdog
⢠Power saving modes
â Slow down mode
â Idle mode (can be combined with slow down mode)
â Software power-down mode
â Hardware power-down mode
⢠17 interrupt sources (7 external, 10 internal) selectable at 4 priority levels
⢠P-MQFP-100 and P-LCC-84 packages
⢠Temperature Ranges : SAB-C517A
SAF-C517A
SAH-C517A
TA = 0 to 70 °C
TA = -40 to 85 °C
TA = -40 to 110 °C
Ordering Information
The ordering code for Siemens microcontrollers provides an exact reference to the required
product. This ordering code identifies:
⢠the derivative itself, i.e. its function set
⢠the specified temperature range
⢠the package and the type of delivery.
For the available ordering codes for the C517A please refer to the
âProduct Information Microcontrollersâ, which summarizes all available microcontroller variants.
Note: The ordering codes for the Mask-ROM versions are defined for each product after
verification of the respective ROM code.
Semiconductor Group
2
|
▷ |